PDA

View Full Version : Logitech G27: problems with calibration of the pedals



mahler491
11-05-2015, 11:40
Hi, while the calibration of the G27 the pedals are not recognized by the program. The wheel is O.K. Another posting says to close Pcars, play with the pedals and start again. But this does not work. Now, is there anyone who can help? Wolfgang

grester
11-05-2015, 11:42
Post your issues here. (http://forum.projectcarsgame.com/showthread.php?22122-G25-G27-SETUP-GUIDE)

CheckSix
11-05-2015, 15:05
I don't know if this will help, but I'll try. ,I have a G25 wheel, and initially, only my accelerator worked, no brakes at all (EEK!). What helped me was to utilise "Logitech G25 separate pedals", and recalibrate the wheel and pedals. I'm then had trouble making it recognise my clutch pedal, but another attempt solved that issue. I hope that helps. You will, of course , have to select "G27 separate pedals", and try that.

Good Luck!

Umer Ahmad
11-05-2015, 15:13
1. unplug everything.
2. restart PC
3. make sure Logitech profiler is running
4. plug in G27
5. Check Logitech profiler sees your wheel/pedal signals (0-->100)
6. push all pedals fully 1 time (full up, full down)
7. Launch steam and start project cars
8. Choose Logitech G27 *separate* pedals (not combined)
9. Do calibration

This should get your pedals working.