PDA

View Full Version : Clio cup set ups?



UKzBRADLEY
11-05-2015, 21:21
Anybody know how to get maxium perform out of the little baby? I seem to have lack of steering in a Corning

Dama The Crow
12-05-2015, 07:00
Bump!

Roger Prynne
12-05-2015, 11:49
What platform? What wheel/controller?

The1Dijk
12-05-2015, 18:39
Main thing I did to get rid of the understeer was lowering the front tyre pressure and raising the rear tyre pressure. Also lowered the front ride height a bit.

Blackvault
12-05-2015, 18:45
I would have a read of this thread (http://forum.projectcarsgame.com/showthread.php?23597-Renault-Clio-nervous). Hopefully there is something within it to help you :)

Pete

gwr3850
13-05-2015, 11:20
Shall share my setup later. Got 1.17.7 at Donington national.

lee2219
13-05-2015, 18:02
The biggest issue i found with the Clio is the brake imbalance. The set up of 40/60 just doesnt sound nor feel right. ive swapped it to 55/45 and also reduced the master cylinder size to 80% and i now find it doesnt end up all out of shape when braking before a bend.

Roger Prynne
13-05-2015, 18:08
^^^ At least you have tried to solve this yourself and found out that the changes work for you.

Shinzah
13-05-2015, 19:11
^^^ At least you have tried to solve this yourself and found out that the changes work for you.

If the developer didn't want people to help EACH OTHER, there wouldn't be a car setup subforum.


I like the brake balance of the Clio Cup personally, but mostly I play with the diffs and leave just about everything else alone. The car responds very well to diff changes.

Guv8T6
13-05-2015, 20:08
I've been struggling with power out of the corners with the megane. Any ideas? Gear Ratios don't really allow for any changes with this car. Only other thought is to drop the fuel pre race

xLeper_Messiah
14-05-2015, 01:38
My setup for the Clio is mostly default, except I lowered the rear tire pressures a bit to help them get Temps quicker, increased the rear antiroll bar, lowered the limited slip accel setting to 80% and I think that was about it? Changed the final drive a bit depending on track, but I haven't touched the suspension settings yet. Oh wait I almost forgot, I lowered the default toe-in on the front to 0.1 too. Try that OP.