PDA

View Full Version : Thrustmaster T100 help.



diddles
19-05-2015, 18:38
Hi, I have the T100 and it works great with drive club but I'm struggling to find the best settings to use with project cars.

I've tried some settings suggested on here and spent time trying my own settings.

It works great in the clios I'm using in career. But if I'm using a faster gt3 car etc, the steering occilates from side to side going down straights, making it very hard to stay in a straight line.

I've tried dead zone removal setting but seems to make it worse.

Any suggestion for some settings would be much appreciated. Thank you.

HarryHoodlum
19-05-2015, 18:41
the steering occilates from side to side going down straights, making it very hard to stay in a straight line.

I've tried dead zone removal setting but seems to make it worse.

This is what the steering deadzone is for. I have the T80 and set it to (5) and problem was completely solved.

diddles
19-05-2015, 18:46
I'll give it ago, but it's the force feed back that tried to centre and wheel a bit to harshly and I have to counter it which makes the car swerve when on straights. Works great for the clio but not on the faster cars.

Zenzic
19-05-2015, 19:08
I fixed the swerving by decreasing the FFB for Fy scale. You can find my setup here (http://apexstalkers.enjin.com/forum/page/2/m/18025943/viewthread/21680767-knowledge-base/post/97592903#p97592903).

Sebstinator
19-05-2015, 20:55
Disable Auto Centering of the wheel. The red led should not blink. Or look in the other one million threads about the T100 for more tips...

Colonelgoldie
20-05-2015, 17:46
I find these ffb settings perfect for my T100. Reduce damping to 0. Move tyre force to about 100. Remove all smoothing. Fx=48 Fy=44 Fz=54 Mz=100. Spindle arm centre of slider. ;)