PDA

View Full Version : Confirmation Needed



tonypbeck
23-06-2015, 09:03
Hi Everyone,

Can someone confirm whether I need to hold the wheel or let it go when calibrating at 900.

I've seen both stated.

Regards

Tony

flymar
23-06-2015, 09:12
Hold 90 deg and press next

Roger Prynne
23-06-2015, 09:19
First step - turn wheel all the way in one direction or the other until it stops then center it - press next - second step - turn to 90 deg and hold it there -- press finish.

tonypbeck
23-06-2015, 09:29
so you don't turn until 900 appears, you turn to 90 degrees no matter what the number is?

flymar
23-06-2015, 09:35
If the wheel is 900 deg and 1st step was done like Roger wrote (and the wheel is calibrated in OS) it should read 900 when turned 90 deg.

tonypbeck
23-06-2015, 09:41
Ah ok, I understand, thank you

Sankyo
23-06-2015, 10:11
If the wheel is 900 deg and 1st step was done like Roger wrote (and the wheel is calibrated in OS) it should read 900 when turned 90 deg.
Not all wheels will show exactly 900, though, but it should be close.