PDA

View Full Version : Thrustmaster TX hose brake mod



STEELJOCKEY
07-11-2015, 21:05
Have been searching for the pic of this mod, can't seem to find it. Does anyone know where this pic is, or repost it please?

Robhd
07-11-2015, 21:52
Is this the girling stainless steel brake mod... As per taken from a Jag D type..lol?.. Or am i losing my mind...? Teee heee heee

STEELJOCKEY
07-11-2015, 22:32
I think you've lost it.

The pic I am looking for has a piece of hose about an inch long with a cut down one side that fits inside the brake pedal spring

Innerspace_HQ
08-11-2015, 00:54
Is this what you're looking for?

http://www.forzamotorsport.co.uk/showpost.php?p=395460&postcount=1

There's an image in there but not sure if you need to sign up to view... in work so can't really check.

STEELJOCKEY
08-11-2015, 01:53
That's it but I can't see the image. I know I've seen it posted somewhere in this forum but can't remember where

MadMuhammad6
08-11-2015, 04:31
221626

I roll with this bad boy. Works a treat!

Dan77 DESTROYER
08-11-2015, 05:11
221626

I roll with this bad boy. Works a treat!


I run my stock tx pedals with two of these shocks (in blue)half filled with shock oil, much better feel than standard.

STEELJOCKEY
08-11-2015, 05:28
Do you guys actually read the OP, or just make posts for the sake of making posts?

Dan77 DESTROYER
08-11-2015, 12:06
Do you guys actually read the OP, or just make posts for the sake of making posts?

Was merely passing comment on madmuhammads post, hope you figure out how to cut your bit of hose soon dude it's making you regimental.

Dynomight Motorsports
11-11-2015, 11:59
I went to Autozone and just cut a piece of hose that fit inside the spring you only need a half inch of rubber hose. Hard to take a picture when it's inside the TX pedals, as you can't even see the spring. Just know it works. :D

MadMuhammad6
11-11-2015, 15:18
Was merely passing comment on madmuhammads post, hope you figure out how to cut your bit of hose soon dude it's making you regimental.

Just giving the guy another option. Sorry to offend your sensibilities.

Edit: incorrect quote. Not aimed at you Dan

STEELJOCKEY
12-11-2015, 03:20
I went to Autozone and just cut a piece of hose that fit inside the spring you only need a half inch of rubber hose. Hard to take a picture when it's inside the TX pedals, as you can't even see the spring. Just know it works. :D

Thank you Dynomight, I'll pass it on to the fellow who is looking for this. Is it a particular type of rubber hose, like fuel line? And you did a split down the side? I gather the hose fills out the spring fairly closely?

Nicho Lucas Dad
12-11-2015, 04:05
is it this?

http://forum.projectcarsgame.com/showthread.php?35394-Thrustmaster-T300RS-brake-pedal-mod

STEELJOCKEY
12-11-2015, 07:23
Thanks Nicho, close, but not it. It was a piece of hose, not thong (or flip flop as some call it). It was slid down the inside of the spring, supposedly up to an inch long, and had a split part way down the side. I'm sure someone has seen it. Hopefully it will turn up one day. StuWard was looking for something, and this looked real cheap, but simple and worked.

inthebagbud
21-11-2015, 12:37
steeljockey

Thing I found the thread try this post http://forum.projectcarsgame.com/showthread.php?36894-T3PA-pedals-for-TX&p=1081138&viewfull=1#post1081138, which has a link in it

STEELJOCKEY
21-11-2015, 13:42
Thankyou, that's the one. I'll pass it on

222447