PDA

View Full Version : been away need help



psydeviant1
30-11-2015, 15:18
hi can some one point me to the latest feedback settings people are happy with , been away since patch 3 , lots of new options in the settings ive not seen before , using the tx, firmware 5, xbone , cheers very much

hbc865
01-12-2015, 07:02
not sure what settings your looking for.. but current update is 6.0 ..im using a Thrustmaster TX and most of the problems I had when 3.0 was out has been fixed

psydeviant1
01-12-2015, 08:55
think im sticking with the settings i had originally from around patch 2 or 3 however there are 3 new sliders ive not seen before spring force for the wheel and steering gain , no idea what these are but my current settings look like this , (my in car settings are from the earlier spread sheet)
main feed back parameters are

tf 38
pwm 0.00

pwms -0.02
wps 0.04
drr 0,10
drf 0.05

ls 0.00
ls 1.00
ld 1.00

rag 1.10
rab 0.10
rac 0.96

sk 0.76
sr 0.22

sc h 0.40
sc f 1.00

mss 0.05
lspc 0.25
lsss 1.00

sg 1.00

----------

nissan4ever
01-12-2015, 10:39
I left my spring force & steering gain at the default. Happy racing

psydeviant1
03-12-2015, 19:52
hi nissan , could you be so kind as to share you feedback settings with me as to how you have them now , plus what in-car settings you use (i take it you use settings from the jack spades spread sheet)

nissan4ever
03-12-2015, 20:13
UPDATED

I use jack spade's 66% chart. My tire force is 45. My FFB is 100. Everything else is default for Force Feedback Calibration Screen and Configuration Screen. Except for the following.

Configuration Screen

Steering Deadzone 0
Throttle Sensitivity 20 (gives me better throttle control through turns)

Force Feedback Calibration Screen

Deadzone Removal Range 0.03

psydeviant1
03-12-2015, 20:36
cheers dude ill try them settings and compare them to mine

nissan4ever
03-12-2015, 21:26
If my 45 tire force isn't strong enough when you try it. Raise it up in increments of 5 till it's where you like the feeling of it.

psydeviant1
04-12-2015, 22:43
im pretty much running these settings now ,my tyre force is 50 and ive added a few clicks of dead zone removal just to tighten up the centre of the wheel but feels pretty good to me

nissan4ever
05-12-2015, 02:45
That's good. Happy racing. How many clicks of deadzone removal did you add?

Update

I added information to post #6. That's exactly what my settings are.

psydeviant1
08-12-2015, 03:31
yep about 3 clicks , the wheel feels good to me :D

Zahony
05-01-2016, 15:23
http://www.isrtv.com/xbox-one/project-cars-force-feedback-tips-and-settings/