PDA

View Full Version : Fanatec CSR (no Elite) with Clubsport V1, not run well the FFB. Clipping



ProDriver
09-12-2015, 16:03
As you can see in my video:

https://youtu.be/k_5ajTHOllM?t=28m43s

From time to time, the FFB is bad in this game (I also have the F1 2015 and do not happens this on it).

I conect the wheel when the game is running and press de X button to start the game, my firmware is 756 and I had calibrate the wheel, the pedals and the FFB (which I am putting it down every moment to avoid the clipping in the telemetry graphic).

I am completly desperate, so if anyone can help me...

The problem is that in straights the wheel turn to the right or to the left without sense...

lancashirelad
09-12-2015, 22:01
As you can see in my video:

https://youtu.be/k_5ajTHOllM?t=28m43s

From time to time, the FFB is bad in this game (I also have the F1 2015 and do not happens this on it).

I conect the wheel when the game is running and press de X button to start the game, my firmware is 756 and I had calibrate the wheel, the pedals and the FFB (which I am putting it down every moment to avoid the clipping in the telemetry graphic).

I am completly desperate, so if anyone can help me...

The problem is that in straights the wheel turn to the right or to the left without sense...

Try connecting your wheel before you turn on your console.

ProDriver
10-12-2015, 07:37
Try connecting your wheel before you turn on your console.


Thank you, I will try and I comment you if its ok.

Sik180sx
12-12-2015, 00:04
Try this out to mate


Okee dokee these are my globals for the 911 turbo s

On wheel
Sens: off
Ff: 100
Sho: personal pref
Dri: 3
Abs: personal pref
Lin:000
Dea: 000
Spr: off
Dpr: off
Acl: off

Global ffb
Tf:100
Pwm:0.00
Pwms:0.00
Wps:0.02
Drr:0.00
Drf:0.00
Leave linkage stuff as is
Rag:0.60
Rab:0.25
Rac:0.55
Sk:0.00
Sr:0.00
Sc half:1.79
Sc full:3.79
Mss:0.40
Lssc:0.75
Lsss:0.60
Sg:1.00

I use all the same settings for the cars and adjust from there

Master scale:34
Fx:54
Fy:38
Fz:92
Mz:76
Smoothing as is and arm angle around 1000 depending how tight or loose around the centre(the looser it is in the centre lower arm angle,and vise versa for a tight centre)

Sop scale:always the same as you spindle master
Sop lat:30
Sop diff:60

I absolutely love these settings,but they are tailored to my tastes,if others enjoy them happy days and if not,all good :)
For a heavier whee lower the soft clip full output value to your preferred wheel weight.
These settings should work with the other 911 wheels and possibly the csr.

ProDriver
14-12-2015, 14:42
Everything go wrong, I only has save the wheel with the tyre force to 60 and the FFB in the wheel to 20...

As you can see in my video:

https://www.youtube.com/watch?v=hoCqgKVdUYc

There are a lot of time where in the graphic, the line is plane in the upper side, also when I am doing zig zags. I am desperate!!!

Thank you anyway!!