PDA

View Full Version : Thrustmaster emblem diameter



Lethal 556
05-01-2016, 16:48
Was looking to order a stick on emblem to cover the thrustmaster logo on the center of the TM28 Leather steering wheel but don't know what the diameter is in mm so I know what size I need to order. I found some on amazon that are 44mm but don't want to order it is it's going to be too big or too small. Thanks in advance for any input!

Roger Prynne
05-01-2016, 17:00
I take it that you haven't got the wheel yet?

Lethal 556
05-01-2016, 17:21
I do have the wheel already

Fanapryde
05-01-2016, 17:28
I do have the wheel already
Just a hint, why not measure it ?

Lethal 556
05-01-2016, 17:31
Hey smartass maybe it's because I'm out of town on a business trip therefore unable to measure it. I would like to order it now so it will be delivered by the time I return home from my trip. You must be one of those people who just assumes everyone else is an idiot

Fanapryde
05-01-2016, 17:46
Hey smartass maybe it's because I'm out of town on a business trip therefore unable to measure it. I would like to order it now so it will be delivered by the time I return home from my trip. You must be one of those people who just assumes everyone else is an idiot
Well, you did your best to look like one...

Lethal 556
05-01-2016, 17:57
Well, you did your best to look like one...

It's not a matter of how my post made me look it's the simple fact that you were quick to just post a smart ass response and instead just looked like a jackass. Its was a nice try though lol

Roger Prynne
05-01-2016, 18:02
It would have been much easier to have stated that you were away from home and cant measure it at the moment.
Would have saved a lot of negative posts.

(Just for future reference):)

Lethal 556
05-01-2016, 18:15
It would have been much easier to have stated that you were away from home and cant measure it at the moment.
Would have saved a lot of negative posts.

(Just for future reference):)

So let me get this right, you (a moderator) are telling me I need to think and word my post in a manner to prevent jackasses from posting smartass comments? Hahaha

Roger Prynne
05-01-2016, 18:18
Just some friendly advice to make it more clear is all.
Being a moderator you see the pattern so many times.

Sankyo
05-01-2016, 19:39
So let me get this right, you (a moderator) are telling me I need to think and word my post in a manner to prevent jackasses from posting smartass comments? Hahaha
The jackass and smartass things are only your perception. You could also have realized that people were rather puzzled by you asking this question while owning the wheel. Even after Roger's initial "I take it you don't have the wheel yet" question you still didn't clarify ("oh, for those who are confused, I'm not in town right now :)"), adding more confusion and hence Fanapryde's question. It's rather odd to see you get so wound up about such a logical and unaggressive reaction.

PJB04
05-01-2016, 22:13
If you can't help why do you feel the need to respond in the first place.

PFalcon
08-01-2016, 16:57
If you can't help why do you feel the need to respond in the first place.

Ummm.... you mean like your post?

Anyway, I do have that wheel at home, so will measure when I get home from work tonight and respond back

jsykes
08-01-2016, 17:12
Well, you did your best to look like one...

+1 on this.

And due to the obvious crappy reactions, my willingness to help went to zero.

Benja190782
08-01-2016, 19:27
I got a 45 mm BMW badge on my F599XX EVO wheel. Do you think that looks too big?
To be honest I think the original Ferrari logo looks too small..

http://share.xboxlife.dk/file/mgfjowewztm4owm1yzrlnjy3y2q3zdk3otg3mgu1ote.jpg

crowtrobot
08-01-2016, 19:29
I got a 45 mm BMW badge on my F599XX EVO wheel. Do you think that looks too big?
To be honest I think the original Ferrari logo looks too small..

http://share.xboxlife.dk/file/mgfjowewztm4owm1yzrlnjy3y2q3zdk3otg3mgu1ote.jpg
I wanted to do this too (1er owner here). Did you disassemble the front plate to do this, or just stick it on top?

Benja190782
08-01-2016, 19:31
^^
Just stick it on top - it looks stunning! ;)

I did it on my original TX wheel also, but it looks better on the F599XX wheel because the center is flat.

Lethal 556
08-01-2016, 19:43
I got a 45 mm BMW badge on my F599XX EVO wheel. Do you think that looks too big?
To be honest I think the original Ferrari logo looks too small..

http://share.xboxlife.dk/file/mgfjowewztm4owm1yzrlnjy3y2q3zdk3otg3mgu1ote.jpg

Thanks Benja looks good

Skyez
26-07-2016, 17:56
Hey Benja,just wanna know what type of tape you used for the stripes?��

beetes_juice
26-07-2016, 18:15
I would think its some type of vinyl tape. May need to do a bit of searching to find exact colors.

https://www.amazon.com/3M-General-Purpose-Coding-6-Roll/dp/B000NG3ZGM

Skyez
26-07-2016, 22:15
ah okay,gonna try do my wheel the same so :P

Skyez
29-07-2016, 13:52
All done,but wont let me post image:/

beetes_juice
29-07-2016, 14:18
Not 100% sure but post count may be to low (think it needs to be +5 posts).

Wondering how it looks, have the tape sitting in my amazon cart.

Skyez
29-07-2016, 17:26
no idea if it worked but tried to send you a image of it in private.