PDA

View Full Version : Thrustmaster Settings T150 RS & T300 RS (+Fanatec CSR & GT3 RS V2)



GTsimms
12-09-2017, 11:55
Since, I was on the WMD side of things this time for Project CARS 2! Note: may not work with every wheel.

Thrustmaster recommends not setting the TMCP higher than 60
1. GAIN 100 (Adjust for Immersive only or Consoles not having the control panel like PC versions)
2. Volume 50 (Adjust this with Flavours and not Gain on the PC Version, Immersive affects the wheel weight light/heavy)
3. Tone 50 (Default is good)
4. FX 50 (0 also produces effects)

I use the following settings with these wheels to keep the ffb graph even (give auto tune on immersive/informative a few laps)
T150 Raw 100/50/50/0-25 zero is normal Thrustmaster Control Panel Gain 38-40 or what works for you
T300 Raw 100/50/50/0 Thrustmaster Control Panel 1080 Gain 41
Fanatec CSR Raw (100/43-45/50/15 or you could leave at defualts and try lowering on the wheel) (SEn/OFF, FF/100, Sho/0, dri/off, Abs 65 or your preference, Lin 0, dEA/0, SPr/0, dPr/0)
GT3 RS V2 Informative (100/40-42/50/16) Raw (100/40-42/50/16) (SEn/OFF, FF/100, Sho/100, dri/OFF, Abs 65 or your preference, Lin 0, dEA/0, SPr/0, dPr/2)



FFB Video by Yorkie065

https://www.youtube.com/watch?time_continue=1436&v=osoxynF0wYw


Help: If your wheel is not recognized in game. Reset your wheel or is some cases delete the Documents/Project CARS 2 folder! (Control Scheme and Reset to Defaults) WMD2 important here, delete your C:\ProgramData\Slightly Mad Studios folder the main reason for all of my ffb issues having a folder with files dating back to May 2017. 11/24/2017

Project CARS 1 Settings T150 RS (http://forum.projectcarsgame.com/showthread.php?22938-Jack-Spade-FFB-Tweaker-Files&p=1147221&viewfull=1#post1147221) and T300 RS (http://forum.projectcarsgame.com/showthread.php?22938-Jack-Spade-FFB-Tweaker-Files&p=1138603&viewfull=1#post1138603)

poirqc
13-09-2017, 23:44
Noooo!

pCars 2 is doomed! The game's not even out yet and there's already a thread about fixing the FFB!

drathuu
14-09-2017, 00:10
Haha, FFB is fine, people like to tune things to their tastes, its much simpler in PCars 2 however detail has been left in for the HCore tweakers to get it exactly how they like it.

I was using a custom FFB file, but in the past month was using the defaults for my G29 setup and it was great - Just pushed up the FX slider so i could get more road surface feedback.

GTsimms
14-09-2017, 01:12
Noooo!

pCars 2 is doomed! The game's not even out yet and there's already a thread about fixing the FFB!

How, there are only 2 options really volume and fx! This is not fixing ffb, only adjusting the range for a specific wheel. Every wheel cannot handle the default settings like the CSW 2.5 and DD's.

poirqc
14-09-2017, 01:18
Haha, FFB is fine, people like to tune things to their tastes, its much simpler in PCars 2 however detail has been left in for the HCore tweakers to get it exactly how they like it.

I was using a custom FFB file, but in the past month was using the defaults for my G29 setup and it was great - Just pushed up the FX slider so i could get more road surface feedback.


How, there are only 2 options really volume and fx! This is not fixing ffb, only adjusting the range for a specific wheel. Every wheel cannot handle the default settings like the CSW 2.5 and DD's.

I know there's nothing to fix! :D

I was just wearing the doomsayer hat! Someone has to do it!

GTsimms
14-09-2017, 02:39
TBH! It was an accidental post, yesterday.

hardlock
17-09-2017, 03:43
Couldn't find any info on the Thrustmaster T150 except here and am in the market for a reasonable priced FFB wheel. Any pCAR user reviews for it? Thanks!

GTsimms
18-09-2017, 21:18
It's a good wheel for the price and better with the T3PA-PRO pedal set!

Aldo Zampatti
20-09-2017, 01:21
Noooo!

pCars 2 is doomed! The game's not even out yet and there's already a thread about fixing the FFB!


It's all about customization/personalization. Me personally I use the "immersive" option out of the box.

poirqc
20-09-2017, 10:48
It's all about customization/personalization. Me personally I use the "immersive" option out of the box.

I know, look at the wheel thread in my signature. ;) i was just poking GTSimms.

Rantam
20-09-2017, 14:36
I invite you to watch this video:


http://youtu.be/gW5ESYLlNnk

It explains Project Cars 2 force feedback system and how to get the best of it. It uses the T300 as example but it will be useful for any player out there using a steering wheel.

Regards

Olijke Poffer
20-09-2017, 14:46
It's a good wheel for the price and better with the T3PA-PRO pedal set!

I Agree.. :D

GTsimms
20-09-2017, 16:08
I invite you to watch this video (http://forum.projectcarsgame.com/showthread.php?51351-Force-feedback-explained-Configuration-settings-for-all-cars-and-tips)

It explains Project Cars 2 force feedback system and how to get the best of it. It uses the T300 as example but it will be useful for any player out there using a steering wheel.

Regards

Got ninja'd, I have been planning on going further into the settings from a default test. But, linked in OP thanks.

Eric Rowland
20-09-2017, 20:39
Anyone used a direct drive wheel with the sim? The video suggests RAW, Gain 100, Vol 50, FX 75 and Speed Sensitivity 45, Damper Saturation 25. Is that a good starting place? Thanks!

GTsimms
20-09-2017, 20:44
Anyone used a direct drive wheel with the sim? The video suggests RAW, Gain 100, Vol 50, FX 75 and Speed Sensitivity 45, Damper Saturation 25. Is that a good starting place? Thanks!

The video is not on the default settings. There are some good points in the video, but IDK the date of the 45 setting(found date 2/23/2017 and default settings were recommended for testing later in dev). Since, things were being adjusted for defaults! But for DD, you should be good at defaults!

sherpa25
21-09-2017, 12:12
... & T300 RS (TMCP default) Raw Gain 100 / Vol 20 (T150 or Vol 18 with FX 14) / Tone 50 / FX 0 or 14) [I]...


Sorry I'm just a bit confused w/ the presentation. Can you pls clarify some portions... .w/c are the settings you suggest re [COLOR="#0000FF"]T300 wheel only?

Vol 20 (T150 or Vol 18 with FX 14) / Tone 50 / FX 0 or 14 --> are all these for T150 only?

GTsimms
21-09-2017, 12:46
Sorry I'm just a bit confused w/ the presentation. Can you pls clarify some portions... .w/c are the settings you suggest re T300 wheel only?

Vol 20 (T150 or Vol 18 with FX 14) / Tone 50 / FX 0 or 14 --> are all these for T150 only?

Vol 20 / Tone 50 / FX 0, 14 or higher on T300 If running higher than 14 you will need to smooth out the ffb signal. Which, I did not like running higher in VR. I was reducing FX to get a better feel and not too much effects!

sherpa25
21-09-2017, 12:57
Vol 20 / Tone 50 / FX 0, 14 or higher on T300 If running higher than 14 you will need to smooth out the ffb signal. Which, I did not like running higher in VR. I was reducing FX to get a better feel and not too much effects!

Thanks. With what parameter/setting do you smooth out the signal? And how does FX affect VR?

GTsimms
21-09-2017, 13:17
Thanks. With what parameter/setting do you smooth out the signal? And how does FX affect VR?

Go by feel and the graphs in game! I don't mind helping out! Just for ex: FX, I reduced it to be more comparable with RL on the road cars with minimal FX through the wheel in VR. But, it may not fit someone's personal taste. But, I was able to get a better feeling out of the tires without the added effects.

Eric Rowland
21-09-2017, 15:31
I think some folks crank up ffb too strong and miss out on the subtleties of ffb. You want to feel what info the tires, the suspension, and the weight transfer are giving you. I'm going to start with the default ffb on my Accuforce and go from there.

GTsimms
21-09-2017, 17:40
Updated op.

konnos
22-09-2017, 00:03
Is there a deadzone removal option somewhere? I might be suffering from some. Or just cars can vary a lot in ffb. I tried the McLaren 750S and it was solid but then the Convette Gt3 was quite loose especially in the centre. I m using Raw and default values seemed pretty nice with the McLaren at least.

GTsimms
22-09-2017, 00:12
Is there a deadzone removal option somewhere? I might be suffering from some. Or just cars can vary a lot in ffb. I tried the McLaren 750S and it was solid but then the Convette Gt3 was quite loose especially in the centre. I m using Raw and default values seemed pretty nice with the McLaren at least.

650S ?

poirqc
22-09-2017, 00:47
Is there a deadzone removal option somewhere? I might be suffering from some. Or just cars can vary a lot in ffb. I tried the McLaren 750S and it was solid but then the Convette Gt3 was quite loose especially in the centre. I m using Raw and default values seemed pretty nice with the McLaren at least.

iirc, RAW doesn't use any auto calibration. immersive and informative do. Maybe it'll help?

really not sure, take it with a grain of salt.

Mad Al
22-09-2017, 00:52
iirc, RAW doesn't use any auto calibration. immersive and informative do. Maybe it'll help?

really not sure, take it with a grain of salt.

That's correct and the T300 would probably not default to raw either

GTsimms
22-09-2017, 00:56
That's correct and the T300 would probably not default to raw either

The T300 defaults to RAW and updated op.

BipolarTuna
22-09-2017, 11:49
Thrustmaster Control Panel at Default (PC only) and Game Configuration Menu Defaults
THRUSTMASTER T150 (2x T150'S) Raw Gain 100 / Vol 20 / Tone 50 / FX 6 or 14 (T150 can use Vol 18 with FX)

Hi all, I've tried to set my t150 to this, everything in the control panel (PC) is set to default, but I pretty much have 0 feeling in my wheel no matter what I try to do. In the widget only the 1st and 2nd bar move, even hitting a wall, and I have to almost every corner make 1 full or more wheel rotations to get around.

There is very little difference from 0 to 100 gain. In the menu's it's very stiff, and if I let go it snaps back to center. Soon as the loading is done, it goes limp.

Control scheme & config are set to defaults, along with the TM control panel (test input & gain settings).

Any help appreciated as my new game is pretty un playable like this.

sherpa25
22-09-2017, 11:53
^. I don't use these settings w/ my T300, I find them too weak... causing quite a large deadzone. But maybe because of the cars I've tried (few GT3 and LMP, and Cat only, so far), as I read some cars are light, some heavier. Suggestions say to try increasing Volume (until the last bar doesn't show Red too much), and play around with Tone. So far I have Volume at around 70.

Morgan Henstridge
22-09-2017, 11:59
Have you guys checked out the stickied post with the video on the FFB setup and tips (http://forum.projectcarsgame.com/showthread.php?51351-Force-feedback-explained-Configuration-settings-for-all-cars-and-tips)??

sherpa25
22-09-2017, 12:01
Have you guys checked out the stickied post with the video on the FFB setup and tips (http://forum.projectcarsgame.com/showthread.php?51351-Force-feedback-explained-Configuration-settings-for-all-cars-and-tips)??

Yup, that's where I started with. Just bear with the robot :)

BipolarTuna
22-09-2017, 12:07
^. I don't use these settings w/ my T300, I find them too weak... causing quite a large deadzone. But maybe because of the cars I've tried (few GT3 and LMP, and Cat only, so far), as I read some cars are light, some heavier. Suggestions say to try increasing Volume (until the last bar doesn't show Red too much), and play around with Tone. So far I have Volume at around 70.

I'll give that a shot.


Have you guys checked out the stickied post with the video on the (had to remove) FFB setup and tips[/URL]??

Yep, I started with that before I even ran the game.

drizzit
22-09-2017, 12:09
Is there any way to set or effect FFB deadzone as in PC1?

In general I'm happy with my FFB settings but the centre just feels a bit loose and weird. In PC1 this was helped by upping the FFB deadzone but I can't find a way to effect this.

konnos
22-09-2017, 12:32
Yea GTSimms, those settings you posted on the T300 are way too weak. The defaults (all to 50) with the Raw flavour are a lot better, maybe 40 volume with some cars. Still, I think there will be further tweaking needed, as some cars are fine like this, some others are better with Immersive or Informative or just need a bump in FFB (eg corvette gt3). The centre in most case is a little too light, that's why I was looking for a deadzone removal (not sure if this is the cause though), i don't know if the presets for our wheels take care of this automatically.

ninjaed by drizzit.

GTsimms
22-09-2017, 13:43
Yea GTSimms, those settings you posted on the T300 are way too weak. The defaults (all to 50) with the Raw flavour are a lot better, maybe 40 volume with some cars. Still, I think there will be further tweaking needed, as some cars are fine like this, some others are better with Immersive or Informative or just need a bump in FFB (eg corvette gt3). The centre in most case is a little too light, that's why I was looking for a deadzone removal (not sure if this is the cause though), i don't know if the presets for our wheels take care of this automatically.

ninjaed by drizzit.

As I posted, it may not work with every wheel and 50 feels horrible on my wheels. I did have the initial car tested and it was using the OEM. But, you don't get in a real vehicle and crank up the steering forces either.

Olijke Poffer
22-09-2017, 14:06
Just tried PC2 with my Thrustmaster T150 but I'm not convinced it is better than with PC1.
I don't feel much FFB. Also the fine detail like curbs and bumps on the tarmac is not as good as in PC1.
I also miss the per car FFB setting in PC2.. is this not present anymore?

BipolarTuna
22-09-2017, 14:17
Thinking a lot of my problem came from miss understanding the wheel calibration.

Turn it to full lock, press next, turn 90° , my understanding of that was turn it back 1/4 / or 90° of a full rotation. May as well be steering with a wet fish.

Noticed in a logitech thread, when making the 2nd turn, it should be roughly on 900, but this is a full rotation (360°). But doing this, makes it so much better. It's playable now at least, have mapped the volume button and will try to fine tune that some what.

konnos
22-09-2017, 14:54
Oh just to be clear GTSimms, about your T300 settings. I was mainly talking about volume needing to be higher than 20. FX slider I keep around 30 or 35, not 50. So far anyway...

GTsimms
22-09-2017, 15:41
Yay phone dp

GTsimms
22-09-2017, 15:41
Oh just to be clear GTSimms, about your T300 settings. I was mainly talking about volume needing to be higher than 20. FX slider I keep around 30 or 35, not 50. So far anyway...

On my wheel I have matched to RL. But, it could be a hit or miss with some vehicles. It could also be a wheel QA issue, since these wheels never had any issues.

Boskapongen
22-09-2017, 16:48
FANATEC GT3 RS V2[/COLOR][/I] Raw or Informative Gain 100 / Vol 22 / Tone 50 / FX 42 [/B] (SEn/OFF, FF/100, Sho/80, dri/OFF, Abs 65 or your preference, Lin 0, dEA/0, SPr/0, dPr/0)

I tried this on my V2 and its so weak i can drive with one finger...canīt be right?

konnos
22-09-2017, 18:10
Increase volume and/or try the Jack Spade files!

GTsimms
22-09-2017, 19:06
I tried this on my V2 and its so weak i can drive with one finger...canīt be right?

Did you read the notes?

Molda
22-09-2017, 22:08
Does somebody with T300RS have any suggestions on how to turn on the FFB for kerbs, grass, bumps etc? Because i tried every FFB flavour, every FFB slider, and no matter what i change i cannot feel the kerbs etc. Overall FFB on track is ok, but the missing FFB on kerbs is weird (my wheel should be ok, when i drive on kerb in for example F1 2017, the FFB and vibrations are there and i can feel the kerb but not in PCars2)

GTsimms
22-09-2017, 23:12
If you have been using raw! Select custom and save , then go back to Raw. See, if it helps!
!

Olijke Poffer
23-09-2017, 07:24
Can we use the same settings in the wheel configuration page as we had in P1? Eg steering deadzone, steering sensivity, etc

GTsimms
23-09-2017, 08:26
Can we use the same settings in the wheel configuration page as we had in P1? Eg steering deadzone, steering sensivity, etc

Yeah possibly, you would need to test. But it is not really recommended to move from defaults like steering sensitivity.

Olijke Poffer
23-09-2017, 08:28
Ah ok... then I will stay away from these settings.. thanks for the feedback.

Molda
23-09-2017, 20:27
Guys with T300RS - today when i wanted to test PCars 2 a little bit more something weird happened to me. Somehow my wheel angle is physicaly half of the angle that is set in the control panel. (and its not about steering sensitivity or steering lock) even when i am in windows, or in the menu of whatever game, the steering angle is half less then it should be. So for example if i set 360, the wheel only has 180 etc. I tried restarting, pluggin off and on the wheel, nothing helps. It never happened to me before. (it also seems as if the FFB is also even lighter then yesterday)
Anyone had the same problem?
BTW how is wheel angle calculated? its from the central position to one side right? so 900 for example means 900 on one side and 900 on the other side and not 450 on one side and 450 on the other side right?

GTsimms
23-09-2017, 22:06
Guys with T300RS - today when i wanted to test PCars 2 a little bit more something weird happened to me. Somehow my wheel angle is physicaly half of the angle that is set in the control panel. (and its not about steering sensitivity or steering lock) even when i am in windows, or in the menu of whatever game, the steering angle is half less then it should be. So for example if i set 360, the wheel only has 180 etc. I tried restarting, pluggin off and on the wheel, nothing helps. It never happened to me before. (it also seems as if the FFB is also even lighter then yesterday)
Anyone had the same problem?
BTW how is wheel angle calculated? its from the central position to one side right? so 900 for example means 900 on one side and 900 on the other side and not 450 on one side and 450 on the other side right?

The last 900 combined!

basementdweller2
25-09-2017, 16:06
THank you! As a long time CSR owner I appreciate any help!

Deathbox_2112
25-09-2017, 18:41
GTsimms, have you had any experience with the Thrustmaster TS-PC? I'm still searching for a good feeling combo. I've had to bring the FX up a bit to help feel the road. I seem to enjoy it on Immersive better than Raw, which kind of surprised me.

Seems like it has always been a wheel that has the strength of the T500 and the feel of the TX.

Any feedback is appreciated!

theVenerable
25-09-2017, 18:46
''THRUSTMASTER T150 (2x T150'S) Raw Gain 100 / Vol 20 / Tone 50 / FX 0 or 14 (T150 can use Vol 18 with FX) ''
Thanks for the effort, but vol 20? I can't feel a thing if it's that low.

GTsimms
25-09-2017, 23:23
''THRUSTMASTER T150 (2x T150'S) Raw Gain 100 / Vol 20 / Tone 50 / FX 0 or 14 (T150 can use Vol 18 with FX) ''
Thanks for the effort, but vol 20? I can't feel a thing if it's that low.

There is an issue with the TM wheels atm. It has surfaced, it was fine during dev!

sherpa25
26-09-2017, 02:58
There is an issue with the TM wheels atm. It has surfaced, it was fine during dev!

TM wheels.... including T300?

Qxs
26-09-2017, 04:22
Since, I was on the WMD side of things this time for Project CARS 2!

Thrustmaster Control Panel Spring and Damper both at 0 (PC only and FIRM 25/Driver 2.9.90.0)
THRUSTMASTER T300 Raw Gain 100 / Vol 20 / Tone 50 / FX 0,14,18 or higher



I now believe this IS the starting point for T300 PC users when using Immersive.

I would go further and try (T300 @75%):
Vol 10
Tone 10
FX 5

Adjust volume as needed with different cars.
This seems to give the right type of useful information, unfortunately adding FX tends to always hide/erase/destroy the useful information.
The solution is to use Simvibe/SimCommander4 to pick up the curbs/bumps instead.

BTW, if testing Custom settings, remove the file before going back to Raw/Informative/Immersive as it seems there are some global settings (mentioned elsewhere??).

Burger_Pedro
26-09-2017, 05:08
The fanatec CSR Are working on PS4 ?

Usvart
26-09-2017, 08:28
Using T150.

I don't feel the kurbs bumps etc anymore. Tried all settings.

Wolkenwolf
26-09-2017, 08:35
There is an issue with the TM wheels atm. It has surfaced, it was fine during dev!
So there is hope for me unhappy T500 user ?

Usvart
26-09-2017, 22:05
Has anyone else with the T150 the problem not feeling kerbs and bumps?

theVenerable
27-09-2017, 01:24
For the T150 users having problems:
http://forum.projectcarsgame.com/showthread.php?51628-Jack-Spade-Custom-FFB-Files
I use the alternative Mid settings file with the following levels: Gain 100, Volume 50, Tone 50, FX 10 (Zero is even ok, but put it as high as you can before you get any clipping). Gain can be 90 - 100, depending on the car you drive.

Argo1
27-09-2017, 01:46
This thread lists settings for the Fanatec GT3 RS wheel. I have one and PCars2 will not recognize that a wheel of any type is connected so it wont let me change any settings or use the wheel at all. Is there a work around or something that I can do?

GTsimms
27-09-2017, 01:50
I now believe this IS the starting point for T300 PC users when using Immersive.

I would go further and try (T300 @75%):
Vol 10
Tone 10
FX 5

Adjust volume as needed with different cars.
This seems to give the right type of useful information, unfortunately adding FX tends to always hide/erase/destroy the useful information.
The solution is to use Simvibe/SimCommander4 to pick up the curbs/bumps instead.

BTW, if testing Custom settings, remove the file before going back to Raw/Informative/Immersive as it seems there are some global settings (mentioned elsewhere??).

Well, I cannot say it is until the game is patched for my settings atm. Right now, I have a big deadzone on my TM wheels!

GTsimms
05-10-2017, 23:43
Ok found out today TM 2017_TTRS_4 was giving us a deadzone! I am back to using my WMD2 testing 2016_TTRS_4 driver. Edit: see op

Alan Dallas
06-10-2017, 05:27
Using TTRS_5 package here now on my TX base with F1 Wheel in Advanced.
Standard settings in TM Control Panel
Ferrari F1 Wheel Advanced T300 selected in game(no F1 on TX option).
Jack's Alternate Mid-Comp custom file
Gain: 100
Vol: 50
Tone: 65(gives more SOP feel)
FX: 50

Feels amazing!!

Morgan Henstridge
06-10-2017, 05:28
Thanks for the Update, Alan :)

RoccoTTS
06-10-2017, 09:35
I see a lot of people using Jack Spade custom settings. Back in PC1 i was a big fan of his settings, but this time i don't like them at all. Did test all the standard flavors and JS mid and low comp.
Am i the only one who think the informative is way better ?

GTsimms
06-10-2017, 10:14
I see a lot of people using Jack Spade custom settings. Back in PC1 i was a big fan of his settings, but this time i don't like them at all. Did test all the standard flavors and JS mid and low comp.
Am i the only one who think the informative is way better ?

I use RAW, Jack's files are good for an immersive flavour. But, RAW feels more 1:1 other than the lack of kerb feel. AJ should be getting the kerbs fixed in a patch soon.

Jbpd
06-10-2017, 21:32
Will updating drivers help on PS4 with T300rs???

msmith792
06-10-2017, 22:26
Not sure about PS4, but on the PC the improvement is significant. I'm really impressed.

davidtriune
07-10-2017, 03:22
Using TTRS_5 package here now on my TX base with F1 Wheel in Advanced.
Standard settings in TM Control Panel
Ferrari F1 Wheel Advanced T300 selected in game(no F1 on TX option).
Jack's Alternate Mid-Comp custom file
Gain: 100
Vol: 50
Tone: 65(gives more SOP feel)
FX: 50

Feels amazing!!

That's almost the exact settings I have for my t300 :O it feels almost exactly like real life IMO. using 60 tone

I find raw just lacking FFB at all. jack spade > immersive > raw IMO. but there's no comparison with jack spade. it's a level above the rest.

Ale10
08-10-2017, 21:54
Flavours (Informative, Immersive, Raw, Custom)
1. GAIN 100 (Adjust for Immersive only or Consoles not having the control panel like PC versions)
2. Volume 50 (Adjust this with Flavours and not Gain on the PC Version, Immersive affects the wheel weight light/heavy)
3. Tone 50 (Default is good)
4. FX 50 (0 also produces effects)


Thrustmaster Control Panel at Default (PC only and 2017_TTRS_5 see link (http://forum.projectcarsgame.com/showthread.php?54080-Fixed-TM-Wheels-Big-deadzone&p=1385189&viewfull=1#post1385189) for install) and Game Configuration Menu Defaults[/B]
THRUSTMASTER T150 (2x T150'S) Raw Gain 100 / Vol 21-25 / Tone 50 / FX 0 or 14 (T150 can use Vol 18 with F]X)


Excuse me but i don't understand how set my t150. First you write to set all 50 and gain 100. Then gain at 100, vol at 21-25, Tone at 50 and FX 0 or 14. Which differences? :) Is it better use Jack Spade's FFB or Raw FFB? :) Thank you!

GTsimms
09-10-2017, 11:45
Excuse me but i don't understand how set my t150. First you write to set all 50 and gain 100. Then gain at 100, vol at 21-25, Tone at 50 and FX 0 or 14. Which differences? :) Is it better use Jack Spade's FFB or Raw FFB? :) Thank you!

The top was default settings and an exaplanation of the settings. I use Raw.

Qxs
14-10-2017, 20:00
Patch 2.0, Win7, T300RS & SimCommander4 Chassis mode, I am currently liking:
Immersive 100/30-60/30/20

nerdmike
18-10-2017, 15:57
How can be used these settings for T300, it's ultra light, I can turn with a single finger. What's the bets setup close to a real behaviour. (Myabe I don't like it but I want the most realistic)

GTsimms
18-10-2017, 16:02
How can be used these settings for T300, it's ultra light, I can turn with a single finger. What's the bets setup close to a real behaviour. (Myabe I don't like it but I want the most realistic)

Be patient and it can depend on the wheel. I will be updating soon! Raw will be your most realistic flavour in the game.

drizzit
18-10-2017, 16:02
How can be used these settings for T300, it's ultra light, I can turn with a single finger. What's the bets setup close to a real behaviour. (Myabe I don't like it but I want the most realistic)

Preferences differ of course but I use the following,
TM settings: 75,100,0,0

Ingame: Jack spades either normal mid or alt mid depending on if you want the added road noise or not, Custom 100,70,50,40

Then play with mainly the volume to get the resistance you want

GTsimms
18-10-2017, 23:32
Updated op and with some additional info.

GTsimms
25-10-2017, 22:58
I did update op, I use Vol 22 on the BMW 1 M and as high as Vol 29-30 on the GTE Corvette. Also, what I have been doing for a while the Raw save, Custom save, and back to Raw save.

pablito
26-10-2017, 08:09
my settings for T300

thrustmaster settings: 70/100/100/0/0
in game: 100/60(gt3)-70(rest)/100/50

with Jack Spades alt lo comp with changed deadzone removal:

#Deadzone Removal as pCARS 1 - deadzone/fall off
(output (tighten output 0.09 0.02))

GTsimms
24-11-2017, 13:41
Updated OP, found issue with ffb. If you were in WMD2 the help section might be beneficial to your ffb experience.

deanince
03-06-2018, 15:38
The top was default settings and an exaplanation of the settings. I use Raw.

Thanks for posting this, these settings have changed the game for me. I found some OK settings initially but completely ****ed up the FFB by fiddling around and subsequently couldn’t drive for toffee.

With these settings (volume at 25, 21 was too weak for me) I’m driving better than I ever have done.