PDA

View Full Version : Dedicated Server GUI



Brado23
22-09-2017, 22:49
Did this ever end up getting implemented? If so, where do I find it?....

http://www.virtualr.net/take-peek-project-cars-2-dedicated-server-settings

Brado23
22-09-2017, 23:04
Don't worry. Found it.

Noisen
22-09-2017, 23:28
Where did you find it mate?

Brado23
23-09-2017, 01:26
Sorry, not sure whether I have actually found it in the end. Thought it was http://127.0.0.1:9000 on the dedicated server itself, but that prompts for credentials and after enabling the httpapi in server.cfg and adding a new user/password in there and assigning it to the "admin" group, it still won't let me log in.

I've browsed through the PDF documents in the dedicated server folder but still can't seem to find anything to fix it specifically.

If someone else can advise what I'm doing wrong I'd appreciate it. Thanks.

patycy
23-09-2017, 09:58
I know this may not be the proper fix, but it temporary allows me to access the admin page. See if it works for you.

// Public rules. The default is to accept everything.
"public" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "admin" },
{ "type" : "reject-password" }
],

Marc Wieneke
23-09-2017, 10:16
I know this may not be the proper fix, but it temporary allows me to access the admin page. See if it works for you.

// Public rules. The default is to accept everything.
"public" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "admin" },
{ "type" : "reject-password" }
],

Your example did not work for me because the resource / is "private" and your rule is for the content which is declared as "public"

Since it is only available from localhost, I finally removed all password prompts and made it "public" to get it working for some testing.


httpApiAccessFilters : {

// Public rules. The default is to accept everything.
// "public" : [
// { "type" : "accept" }
// ],

// Public rules. The default is to accept everything.
"public" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "admin" },
{ "type" : "accept" }
],

// // Private rules. The default is to accept queries from localhost, queries authenticated as users in the "private" group
// // and to reject anything else.
"private" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "private" },
{ "type" : "accept" }
],

// Admin rules. The default is to accept queries from localhost, queries authenticated as users in the "admin" group
// and to reject anything else.
"admin" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "admin" },
{ "type" : "accept" }
],

}

This works for me without authentication. Could not access with user & password...

patycy
23-09-2017, 10:39
Your example did not work for me because the resource / is "private" and your rule is for the content which is declared as "public"

Since it is only available from localhost, I finally removed all password prompts and made it "public" to get it working for some testing.


httpApiAccessFilters : {

// Public rules. The default is to accept everything.
// "public" : [
// { "type" : "accept" }
// ],

// Public rules. The default is to accept everything.
"public" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "admin" },
{ "type" : "accept" }
],

// // Private rules. The default is to accept queries from localhost, queries authenticated as users in the "private" group
// // and to reject anything else.
"private" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "private" },
{ "type" : "accept" }
],

// Admin rules. The default is to accept queries from localhost, queries authenticated as users in the "admin" group
// and to reject anything else.
"admin" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "admin" },
{ "type" : "accept" }
],

}

This works for me without authentication. Could not access with user & password...

Glad to know you managed to get it working.

Quick question, when you start up the dedicated server, do you experience error loading LUA addon for sms_rotate.lua file?

Marc Wieneke
23-09-2017, 10:44
Glad to know you managed to get it working.

Quick question, when you start up the dedicated server, do you experience error loading LUA addon for sms_rotate.lua file?

No.

Setting breakpad minidump AppID = 378860
[2017-09-23 10:41:27] INFO: HttpApi started
[2017-09-23 10:41:27] INFO: Loading LuaApi addon 'sms_base'...
[2017-09-23 10:41:27] INFO: Loading LuaApi addon 'sms_rotate'...
[2017-09-23 10:41:27] INFO: Loading LuaApi addon 'lib_rotate'...
[2017-09-23 10:41:27] INFO: Loading LuaApi addon 'sms_motd'...
[2017-09-23 10:41:27] INFO: Loading LuaApi addon 'sms_stats'...
[2017-09-23 10:41:27] INFO: LuaApi started
[2017-09-23 10:41:27] INFO: Dedicated server is starting...
FillInMachineIDInfo took a total of 158 milliseconds
[2017-09-23 10:41:28] INFO: Connection to Steam established

But if I use -c and place the server.cfg in an other directory outsite the dedicated server for managing multiple servers it cannot load the lua files even if I copy them to the other folder with the server.cfg in it.

Nevertheless my server does not appear in the server list so all other things are 2. prio for me. :(

Hondo
23-09-2017, 10:57
Could you pls post your cfg file. Im getting errors and trying to figure what it could be.

Brado23
23-09-2017, 10:58
OK, with help from both of you I have managed to get it to work by combining your info :-)

Here is my setup....

240325

A big thanks to both of you for your help!!

BTW I get the error on Lua rotate as well, so it's not just you.

Shooter80
23-09-2017, 11:01
Yea, I believe the simplest fix is to just add the user account you want to use into both "prviate" and "admin". If you just add it to "admin" it wont let you log in.

clanky
23-09-2017, 12:20
So is there a GUI like shown in that other site? I'm not tech savy enough to go in and start editing files like you guys posted.

Marc Wieneke
23-09-2017, 12:27
OK, with help from both of you I have managed to get it to work by combining your info :-)

Here is my setup....

240325

A big thanks to both of you for your help!!

BTW I get the error on Lua rotate as well, so it's not just you.

This works for me with authentication but the server does not appear in the list anyways. So it is useless for me. :(

erickgoldner
23-09-2017, 12:48
This works for me with authentication but the server does not appear in the list anyways. So it is useless for me. :(

Mine was not showing too when i was testing yesterday!
Then i went to filters and changed to Dedicated only and then it showed!
For some reason, it does not show on the primary page without any filters!
Give it a try!

Shooter80
23-09-2017, 16:15
Yea, they patched it last night to hide all the dedicated servers, by filtering them out by default (even 'ALL' doesnt include them), so dont expect much traffic.


Hi all. Thanks for your patience on this. We have an imperfect temporary fix that'll get people playing again. I won't bore you with the details of the problem (and in no way is that management speak for 'I don't understand the problems well enough to explain them to you'), but basically we're bumping into a limitation when there are more than 50 lobbies that include Dedicated Servers.

Our fix – which is a quickie, designed to get things moving – removes Dedicated Servers from the 'ALL' lobby filter, which is the default filter. With DS removed, you'll be able to enter lobbies as normal. You can switch to filter Dedicated Servers, and enter them correctly, too.

HOWEVER. If you switch from filtering Dedicated Servers to filtering 'ALL' (which will only be P2P under the fix) or 'P2P', you'll have to restart the game. Each time you switch away from P2P/ALL to DS, and then back again, you'll need to restart. It's not elegant, but it'll get the vast majority of people up and running quickly. Proper fix incoming next week...//..

Visceral_Syn
23-09-2017, 16:19
Yea, they patched it last night to hide all the dedicated servers, by filtering them out by default (even 'ALL' doesnt include them), so dont expect much traffic.
This is incorrect, I have been testing my dedicated server, it lists. Not configured how I have set to be, but it does list.

whip
23-09-2017, 19:12
So is there a GUI like shown in that other site? I'm not tech savy enough to go in and start editing files like you guys posted.

^this, i have rented a server and have no clue how to get this gui connected to work with it, i thought the devs would have a simple how to but i can't find anything

VitorFerreira_CH
23-09-2017, 23:26
Hi, I tried what was posted here and it worked, but I can not edit the server settings by APP. I click on session atributes, but nothing appears to configure the server. Help me please.

"//" : "You can use dummy entries like this to write comments into the config. 'rem' and '#' are also supported as comment entries."
// But in recent version of the server, standard C++ like one-liner comments are supported as well.

//////////////////////////
// Basic server options //
//////////////////////////

// Logging level of the server. Messages of this severity and more important will be logged. Can be any of debug/info/warning/error.
logLevel : "info"

// Number of gameplay events stored on the server. Oldest ones will be discarded once the game logs more.
eventsLogSize : 10000

// The server's name, this will appear in server browser (when implemented) and will be also the default name of sessions hosted on the server.
name : "bravos test"

// Authenticate users with Steam to check VAC ban when set to true.
secure : true

// Password required to create sessions on the server as well as to join the sessions, password set in Create options is ignored on DS.
password : ""

// Maximum size of sessions that can be created on this server.
// Note that setting this above 16 will allow sessions unjoinable by 32-bit clients to be created on the server.
// The game also currently does not support sessions larger than 32, even if the server can be configured for up to 64 players.
maxPlayerCount : 64

// IP address where the server's sockets should be bound. Leave empty for 'all interfaces'.
bindIP : ""

// ports used to communicate with Steam and game, they must all be accessible on the public IP of the server.
steamPort : 8766
hostPort : 27015
queryPort : 27016

// Delay between server ticks in milliseconds, when not hosting and when hosting a game, respectively.
// Lower values will make the server more responsible and decrease latency by a bit at the expense of higher CPU usage.
sleepWaiting : 50
sleepActive : 10

// Sports Play will use system sockets instead of Steam networking API. Recommended for offline LAN-only events.
// Use cmdline switch -sportsplay serverIp:hostPort on client to host and join games on sportsPlay server.
sportsPlay: false

// (blacklist and whitelist is intentionally not included in this basic sample config as they can complicate things a bit.)


///////////////////////////
// HttpApi configuration //
///////////////////////////

// This provides http-based API and basic web-based controls using a built-in http server.
// HttpApi is disabled by default, and if you enable it with everything else left to default it will listen only locally on 127.0.0.1:9000

// Master enable/disable toggle.
enableHttpApi : true

// Similar to logLevel above but used only for libwebsockets output.
// Note that all logging still goes through the main filter, so you won't be able to use more verbose logging here than the main level.
httpApiLogLevel : "warning"

// Interface name or IP where to bind the local http server providing the API and web-based controls.
// This is the textual name of the interface as assigned by your OS, or IP address of the interface.
// The default value is "127.0.0.1", change it to an empty string to bind the listen socket to all available interfaces.
httpApiInterface : "127.0.0.1"

// Port where the local http server listens.
httpApiPort : 9000

// Map with extra HTTP headers to add to HTTP API responses.
// The keys are the conditions for adding the headers, the values are the headers to add.
// There are no conditions supported yet, so just use "*" for a generic wildard for now, that will match everything in the future too.
httpApiExtraHeaders : {
"*" : "Access-Control-Allow-Origin: *"
}

// Http API access level overrides.
// Each HTTP API endpoint defines its default access level, usually one of "public", "private" or "admin".
// This map can override these levels to anything else. The keys are wildcard endpoint paths, and the values are the
// access levels to use. The first path that matches will be used, processing them in the order as written here.
// The wildcard patterns are case-sensitive and can contain:
// - '*': matches 0 or more characters
// - '%': matches 0 or more characters except for forward slash
// - '?': matches 1 character
httpApiAccessLevels : {
// The default is empty, using defaults as defined by the endpoints themselves.

// But you could for example use this to change all access levels to public (not recommended!)
// "*" : "public"

// Or this to hide the status from public
// "" : "private"
// "status" : "private"

// And similar to hide the help and lists from public
// "api/help" : "private"
// "api/list*" : "private"

// As you can see from the example above, the paths should be written with no initial or trailing slashes.
}

// Filtering rules for the access levels.
// The default access levels are "public", "private" and "admin", but the httpAccessLevels above can define any additional levels.
// This map then tells the server who has access to which level. It's a map from level names to filtering rules.
//
// Filtering rules are then specified as a list of structures, processed in the order as written in the config.
// Each rule structure contains a type" and then type-specific fields. The supported types are:
// - "accept": Accept this request, no additional checks.
// - "reject": Reject this request, no additional checks.
// - "reject-password": Reject this request and let the client know that a password is required, no additional checks.
// - "ip-accept": Accept this request if it matches the "ip" mask in CIDR notation (for example, "192.168.1.0/24")
// - "ip-reject": Reject this request if it matches the "ip" mask in CIDR notation (for example, "192.168.1.0/24")
// - "user": Accept this request if it authenticates as given "user".
// - "group" : Accept this request if it authenticates as given "group".
//
// User/group authentication is done using the standard HTTP basic access authentication (https://en.wikipedia.org/wiki/Basic_access_authentication).
httpApiAccessFilters : {

// Public rules. The default is to accept everything.
// "public" : [
// { "type" : "accept" }
// ],

// Public rules. The default is to accept everything.
"public" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "admin" },
{ "type" : "accept" }
],

// // Private rules. The default is to accept queries from localhost, queries authenticated as users in the "private" group
// // and to reject anything else.
"private" : [
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "private" },
{ "type" : "reject-password" }
],

// Admin rules. The default is to accept queries from localhost, queries authenticated as users in the "admin" group
// and to reject anything else.
"admin" : /api/session/kick, /api/session/set_attributes, /api/session/set_next_attributes,
/api/session/send_chat
[
{ "type" : "ip-accept", "ip" : "127.0.0.1/32" },
{ "type" : "group", "group" : "admin" },
{ "type" : "reject-password" }
],

}

// User list. Map from user names to passwords, in plain text.
httpApiUsers : {
// "stepan" : "foo",
// "michal" : "bar",
"vitor" : "online",
}

// User groups. Map from group names to lists of users in said groups.
httpApiGroups : {
// "private" : [ "stepan", "michal" ],
// "admin" : [ "admin" ],
"private" : [ "vitor" ]
"admin" : [ "vitor" ]
}

// Root directory where the static files for the web tool are located. Relative to current directory.
staticWebFiles: "web_files"


//////////////////////////
// LuaApi configuration //
//////////////////////////

// Lua API allows the server to be extended by in-server scripting in Lua.
// The server is running Lua version 5.3, currently with no sandboxing applied to the add-ons. All standard Lua library functions are available.

// WARNING: The LuaApi is not final and the following breaking changes are planned soon:
// - Rename Lua addon metadata files from *.txt to *.json
// - Remove default config from the metadata and put it into separate file *_default_config.json
// - Separate config and persistent data, so that data saved by addons will not pollute the config files, and the config files will retain all comments from the default files.

// Master enable/disable toggle.
enableLuaApi : false

// Root directory from which the Lua addons are loaded. Relative to current directory if it's not absolute.
luaAddonRoot: "lua"

// Root directory where the addon configs will be stored if written out by addons. Default configs are defined in the addon base text files.
luaConfigRoot: "lua_config"

// Root directory where the addon output will be written, once supported. For now the io functions can write anywhere, but this will be limited to this directory in the future.
luaOutputRoot: "lua_output"

// Names of all Lua addons to load. The addons will be loaded in the specified order. Each addon can list other addons as its dependencies, which attempt to load those first.
// The server will load addons from directory specified in "luaAddonRoot", loading of each addon will start by loading its config from ADDON_NAME/ADDON_NAME.txt
luaApiAddons : [

// Core server bootup scripts and helper functions. This will be always loaded first even if not specified here because it's an implicit dependency of all addons.
"sms_base",

// Automatic race setup rotation.
"sms_rotate",

// Sends greetings messages to joining members, optionally with race setup info, optionally also whenever returning back to lobby post-race.
"sms_motd",

// Tracks various stats on the server - server, session and player stats.
"sms_stats",
]

// Names of all lua libraries that are allowed to be used by any addons.
luaAllowedLibraries : [

"lib_rotate"
]

////////////////////////////////
// Game setup control options //
////////////////////////////////

// Set to true to make this server show up in the browser even if it's empty.
allowEmptyJoin : true

// Set to true to enable API that allows the server to control the game's setup. The host will not be able to control the setup if this is set.
// Set to true to enable API that allows the server to control the game's setup. The host will not be able to control the setup if this is set.
// This must be set to "true" for the following attributes to work: ServerControlsTrack, ServerControlsVehicleClass, ServerControlsVehicle
controlGameSetup : true

// Initial attribute values, see /api/list/attributes/session for the full list.
// These attributes will be used when joining an empty server via the borwser (if allowEmptyJoin is true) and as the intial attributes for the set_attributes and set_next_attributes APIs (if controlGameSetup is true)
// The defaults set these values:
sessionAttributes : set_attributes,
{
// The host player can control track selection if set to 0. Set to 1 to disable track selection in the game.
"ServerControlsTrack" : 1,

// The host player can change the vehicle class by going through the garage if set to 0. Set to 1 to disallow players changing the class.
// Flag FORCE_SAME_VEHICLE_CLASS (1024) should be also set for this to make sense, otherwise players are able to choose cars from any class.
"ServerControlsVehicleClass" : 1,

// Players can change their vehicle if set to 0. Set to 1 to disallow players changing the vehicle.
// Flag FORCE_IDENTICAL_VEHICLES (2) should be also set for this to make sense.
"ServerControlsVehicle" : 0,

// Grid size up to 32, all reserved to players, so no AI.
// Note that 32-bit clients will not be able to join the game if this is larger than 16.
"GridSize" : 24,
"MaxPlayers" : 24,

// Just 3 race laps.
"PracticeLength" : 0,
"QualifyLength" : 0,
"RaceLength" : 3,

// Race flags - bitfield consisting of many flags, the default is set like this:
// ALLOW_CUSTOM_VEHICLE_SETUP (8) + ABS_ALLOWED (32) + SC_ALLOWED (64) + TCS_ALLOWED (128) + "
// FORCE_SAME_VEHICLE_CLASS (512) + FILL_SESSION_WITH_AI (131072) + AUTO_START_ENGINE (524288) = 656106"
// See /api/list/flags/session in HTTP API, or globals "lists.flags.session" or "SessionFlags" in Lua API for the full list.
"Flags" : 656106,

// AI opponent difficulty, from 0 to 100. Applies only on loading if GridSize is larger than MaxPlayers, and the FILL_SESSION_WITH_AI flag is enabled.
"OpponentDifficulty" : 50,

// Visual only damage
"DamageType" : 1,

// No tire wear.
"TireWearType" : 8,

// Fuel usage off.
"FuelUsageType" : 2,

// Penalties on.
"PenaltiesType" : 1,

// Any camera view allowed.
"AllowedViews" : 0,

// Track Brands Hatch Indy. See /api/list/tracks/ in HTTP API or globals "lists.tracks", "id_to_track" or "name_to_track" in Lua API.
"TrackId" : 1988984740,

// Vehicle class Road A. See /api/list/vehicle_classes/ in HTTP API or globals "lists.vehicle_classes", "id_to_vehicle_class" or "name_to_vehicle_class" in Lua API.
"VehicleClassId" : 767810805,

// Vehicle McLaren 720S (but not forced by default flags). See /api/list/vehicles/ in HTTP API or globals "lists.vehicles", "id_to_vehicle" or "name_to_vehicle" in Lua API.
"VehicleModelId" : 1106819298,

// Starting date and time.
"RaceDateYear" : 2015,
"RaceDateMonth" : 7,
"RaceDateDay" : 6,
"RaceDateHour" : 11,

// Single weather slot set to "Weather_Clear1". See /api/list/enums/weather in HTTP API or globals "lists.enums.weather" or "Weather" in Lua API.
"RaceWeatherSlots" : 1,
"RaceWeatherSlot1" : -934211870,
"RaceWeatherSlot2" : -934211870,
"RaceWeatherSlot3" : -934211870,
"RaceWeatherSlot4" : -934211870,
}

VitorFerreira_CH
24-09-2017, 00:38
I did, but I have another problem. When the configuration is saved, a message "HTTP request to server API failed - Server attributes could not be modified" and does not save the changes.

Nyze
28-09-2017, 15:16
I did, but I have another problem. When the configuration is saved, a message "HTTP request to server API failed - Server attributes could not be modified" and does not save the changes.

Same here.. Anyone can help?

#edit

Also i cant find the server in the ingame server browser

Ferrari312
01-10-2017, 05:33
I can login to the web admin console as private but none of the settings will take. I can't seem login as admin and control the server either.