PDA

View Full Version : (PC) PROBLEM WITH DEFAULT BUTTONS ASSOCIATION



Borrer0
23-09-2017, 11:56
Hi... sorry for my english.

I have problems with the default assignment of certain buttons.

I made a home-custom keypad for my G27 from a numerical keyboard. My dedicated button for the pit limiter would correspond to the "6" key of the numeric keypad.

The problem is that PC2 has default associated the keys 2,8,4 and 6 to look down, up, left and right. I can associate the "6" button for the limiter, but pressing it while playing the game looks to the right while activating / deactivating the limiter, which is very annoying.

I wonder if it is possible to disassociate that key to "look to the right", and how to do it.

Thanks.

Haneye1969
23-09-2017, 12:57
Your english is very good!! Canīt help you with the G27 though, I use Thrustmaster 300

Morgan Henstridge
23-09-2017, 13:06
In the controller settings > Edit Assignments, you should be able to re-assign the keys for look left, right, up and down.

Borrer0
23-09-2017, 13:10
I did it. However, those keys ( "2,4,6,8" of the numeric Keypad) are also associated independently of those that you choose in the settings.

Borrer0
23-09-2017, 15:33
Do the test: Associate any of these keys of your numerical keyboard (2,4,6,8) to any action (limiter, or whatever) and you will see that pressing the game will look at the address assigned by default to the time the action is executed

Borrer0
25-09-2017, 15:13
In the controller settings > Edit Assignments, you should be able to re-assign the keys for look left, right, up and down.

Nobody can help me? The previous answer doesnt solve anything.

GTsimms
25-09-2017, 17:32
Did you try this after a race? It might be best to start the game u fresh and immediately try the button assignment!

VelvetTorpedo
25-09-2017, 17:37
I noticed that also. Those buttons were always hard coded no matter what to look up, down, left, and right. That's how it was in pcars1 also, and there never was a fix.

GTsimms
25-09-2017, 17:40
I noticed that also. Those buttons were always hard coded no matter what to look up, down, left, and right. That's how it was in pcars1 also, and there never was a fix.

Thanks for the reply!