PDA

View Full Version : Force feedback problem with ClubSport V3 pedals



kurtz
23-12-2017, 17:45
Hello! :)

My ClubSport V3 pedals connected with CSW 2.5 does not produce any brake or accelerator vibration.
Doing a pc test, the engines work well.

How can I activate the vibration, at least of the brake pedals?

Many thanks.

Sankyo
23-12-2017, 18:05
Hello! :)

My ClubSport V3 pedals connected with CSW 2.5 does not produce any brake or accelerator vibration.
Doing a pc test, the engines work well.

How can I activate the vibration, at least of the brake pedals?

Many thanks.

What are your on-wheel settings? What firmware version is installed on pedals and wheel?

kurtz
23-12-2017, 18:23
What are your on-wheel settings? What firmware version is installed on pedals and wheel?

Hello Sankyo,

I have the last firmware on V3 pedals (1.30) and on CSw 2.5 base with 292 drivers...

Settings on game:
raw
100
50
50
50
0.05

Settings on wheel:
brf: 50
dri: -03
abs: 95
sho: 100
ffb: 100
sen: aut

transfix
24-12-2017, 11:35
Turn your ABS down to around 75. At 95 you need to press very hard to get vibration working. I run mine at 70.

Sankyo
24-12-2017, 12:20
With ABS set to a value, the brake rumble only depends on brake pedal movement and not on game input. Not sure if that then also affects throttle rumble, but if you want the game to control pedal rumble you should disable ABS. This applies only when pedals are connected through the wheel.

kurtz
24-12-2017, 21:50
Many thanks!

Increasing brf and reducing abs activate the force feedback ;)

However, the sensation is barely perceptible.
The accelerator instead not works at all

transfix
26-12-2017, 16:01
Throttle is not supported at this time on Xbox. Hopefully they can add it soon.

Sankyo
26-12-2017, 16:23
However, the sensation is barely perceptible.

That is not something the game can change, as it is limited by the hardware (not so powerful motor vs very stiff metal design).