PDA

View Full Version : Tyres pressure [Yes, again]



Lakiboom
11-10-2018, 10:40
We have the Thread (forum.projectcarsgame.com/showthread.php?57541-Project-CARS-2-Tyre-Pressures) with recommended tyre pressure for different cars. But it's only numbers for me. I want to see the difference and know that if a car start feels wrong it's because the wrong pressure. So there we've got a very good Step-by-Step-Setup-Guide (http://forum.projectcarsgame.com/showthread.php?64015-Nighttigers-s-Step-by-Step-Setup-Guide) with this picture.

261144

Also i saw information like that on many sites about setup understanding. Anyway, the question is that I've never saw tires pressure in PC2 like this. In telemetry we have outside, middle and inner temperature. And in my practice I've never saw mid temperature was much higher than outside and inner. Or too low. And more of that, inside temperature always higher than others. So how to understand that pressure is fine. Or temperature O-M-I doesn't show right deformation of tire?

I'm asking because I use this recommendations (forum.projectcarsgame.com/showthread.php?57541-Project-CARS-2-Tyre-Pressures), but I don't often happy with this on track.

Bealdor
11-10-2018, 10:56
It's actually working quite well with I-M-O temperatures. Depending on your camber, the difference between inside and outside temperature will vary. If your tire pressures are correct, the middle temp will be right between those values.

Example:

Inside 100C
Outside 90C

Middle 92C (too low pressure)
Middle 95C (optimal pressure)
Middle 98C (too high pressure)

Lakiboom
11-10-2018, 11:01
Thanks, will check it. I thought it might be like
I - 100
M - 105
O ~100

Bealdor
11-10-2018, 11:03
Thanks, will check it. I thought it might be like
I - 100
M - 105
O ~100

Inside should always be hotter than outside. If it isn't, increase negative camber angle.

Lakiboom
11-10-2018, 11:09
I think it will be good to add this

Example:

Inside 100C
Outside 90C

Middle 92C (too low pressure)
Middle 95C (optimal pressure)
Middle 98C (too high pressure)

to Project CARS 2 Tyre Pressures (http://forum.projectcarsgame.com/showthread.php?57541-Project-CARS-2-Tyre-Pressures) thread.

Jussi Karjalainen
18-10-2018, 00:19
Inside should always be hotter than outside. If it isn't, increase negative camber angle.Note that this is not necessarily always possible. Some, especially REALLY old cars, might have suspensions that simply won't play ball with you, so be prepared to make concessions for some cars. With anything relatively modern (certainly anything since the 80s)

Zeratall
18-10-2018, 08:01
Just gonna post this here. Graphical Representation of I-M-O.

Ideal:
261379

Leaving the Pits:
261380