PDA

View Full Version : Z06 Baseline Setup



Unun
13-12-2018, 16:54
Works pretty good with a controller. I imagine it would be unstoppable with a wheel.

Tires/Brakes/Chassis
Brake Pressure: 95%
Brake Balance: 72/28

Suspension
Camber Front/Rear: -1.8//-2.0
Ride Height Front/Rear: 112mm//114mm
Spring Rate Front/Rear: 149n/mm//105n/mm
Steering Ratio: 13.5:1
Toe In Front/Rear: 0.1//0.2
Anti Roll Bars Front/Rear: 30n/mm//10n/mm

Dampers
Bump Stop Front/Rear: 0mm//0mm
Slow Bump Front/Rear: 11500n/m/s//14500n//m/s
Slow Rebound Front/Rear: 10400n/m/s//12700n/m/s
Fast Bump Front/Rear: 7250n/m/s//7250n/m/s
Fast Rebound Front/Rear: 11750n/m/s//11750n/m/s
Bump Transition Front/Rear: 590n//535n
Rebound Transition Front/Rear: 525n//525n

ECU/Engine/Gearing
Traction Control: 50%
ABS Strength: 20%

Differential
Clutch LSD ONLY
Preload: 0nm
Clutches: 2
Power Ramp: 25 deg
Coast Ramp: 40 deg