Results 1 to 9 of 9

Thread: Thrustmaster T3PA Pedals - Throttle & Clutch swapped?! (and some other questions)

  1. #1
    Kart Driver
    Join Date
    May 2015
    Location
    Fochabers
    Posts
    18
    Platform
    PS4

    Question Thrustmaster T3PA Pedals - Throttle & Clutch swapped?! (and some other questions)

    Hi everyone, I love the game so far, but I have a couple of questions and wonder if anyone else has similar experiences?

    I'm using a Thrustmaster T300RS wheel with TH8A shifter and T3PA pedals. All assists are off and it's set to "Pro" defaults.

    My problem is that the throttle and the clutch appear swapped round, where the throttle is on the left, and the clutch is on the right. I tried calibrating the pedals and pressing the throttle shows the clutch on-screen slider move, and vice-versa for the clutch moving the throttle slider.

    It's not a massive issue as I remapped the button configuration so the game is playable, but it would be nice to see if anyone else had found this bug too.

    Also, I have ignition and engine start buttons mapped but there doesn't appear to be any visual indication that your ignition is on or off before you go for the start engine button; at least not that I could see on the two cars I've tried so far - the Ford Sierra and Focus, maybe I'm missing the obvious?

    One last query - does the PS4 version have options for turning the hands and steering wheel graphics off?

    Thanks in advance.

  2. #2
    Kart Driver
    Join Date
    May 2015
    Location
    Brisbane
    Posts
    17
    Not sure about the pedals, my T3PA pedals seem to work fine.

    Yes yo can switch off the hands and steering wheel, it's under Options / Gameplay / Onscreen Guides and Display.

  3. #3
    GT5 Pilot Fanapryde's Avatar
    Join Date
    May 2015
    Location
    Belgium
    Posts
    1,841
    Platform
    PC
    You do have your mode light red ? If it is green, throttle and clutch are switched...
    Sim-Lab P1 rig with integrated triple monitor brackets, Logitech Z906 5.1, OSW Simucube small Mige - BissC encoder / SSRG Custom wheel / Fanatec CSW shifter / Heusinkveld Ultimate pedals / Heusinkveld SQ shifter / ignitIONControls R1 button box. Creative 7.1 soundcard (x2) / 3 BENQ XL2720Z 144 Hz 27" PC: ASUS Pro Series - Intel i7 4790 (8x 4GHz) - Win10Pro - nVidia GTX 1080 ti - 16 GB ddr3 - SSD 256 GB / / RS Dash

  4. #4
    WMD Member Christiaan van Beilen's Avatar
    Join Date
    Oct 2011
    Location
    Groningen
    Posts
    2,115
    Platform
    PC
    Hold the "Mode" button on your steering wheel for a 5-10 seconds until the light flashes. Release it and your throttle and clutch pedals are switched around.

    This feature is made so you can turn the pedals upside down into hanging GT mode or standing Formula mode.
    Christiaan's Pure FFB (latest version: v1.0): http://forum.projectcarsgame.com/sho...ARS2-FFB-File)

    System: Intel i7 2600k @ 4.2GHz - Noctua NH-D14 - MSI Z68A-GD65 (G3) - Vengeance LP 16GB 1600mhz - MSI GTX 970 Gaming 4G @ 1114Mhz - AverMedia Live Gamer HD (1080p@30hz capture card) - OCZ Vertex 4 256GB (FW: 1.5) - Creative Soundblaster X-Fi titanium champ - Logitech Z-560 4.1 - LG OLED55B8PLA TV

    Input: Logitech Wingman Formula Force - Logitech G25 - Thrustmaster T500 RS - Thrustmaster TH8 RS - Fanatec ClubSport Wheel - Fanatec ClubSport Pedals V1 & V2 - Fanatec ClubSport Shifter SQ - Fanatec ClubSport BMW M3 GT2 rim - Fanatec ClubSport Formula rim (*italic = in use)
    The following user likes this Post: stux


  5. #5
    WMD Member
    Join Date
    Oct 2012
    Location
    GIJÓN
    Posts
    3
    I have same setup, you only beed to push botton MODE!

  6. #6
    Kart Driver
    Join Date
    May 2015
    Location
    Fochabers
    Posts
    18
    Platform
    PS4
    Thanks for all the replies and the useful information, I'll give those a try

  7. #7
    Superkart Pilot
    Join Date
    May 2015
    Location
    Sydney
    Posts
    369
    Platform
    XBOX1
    Mode light was green for me. Hold mode button down for 1 second and it will switch to red when you let go and the pedals will switch back to how they should be.
    XB1 + Kinect + Seagate 2TB
    TX + T3PA + TH8A + Leather GT28

  8. #8
    Kart Driver Haulin_Hebrew's Avatar
    Join Date
    May 2015
    Location
    Decatur
    Posts
    14
    Platform
    PS4
    Thanks bro I was wrenching my brain trying to figure this out, everything is great now!!!

  9. #9
    GT4 Pilot Olijke Poffer's Avatar
    Join Date
    May 2015
    Location
    Netherlands
    Posts
    2,781
    Platform
    PC
    Lol, I had the same problem a couple of day's ago.. after some fiddling I also discovered the light was green and not red anymore.. so a quick push on the button and it all was back to normall.

Similar Threads

  1. No Throttle on Azure Coast and Calfonia Hiway.
    By DeaKen002 in forum XB1 - Technical Help & Support
    Replies: 8
    Last Post: 20-07-2015, 11:24
  2. A couple of noob questions
    By KiwiMan in forum General Discussion
    Replies: 4
    Last Post: 21-06-2015, 19:06
  3. BMW Z4 Soundbug and Clutch / Handbrake Button
    By X30 Nemec666 in forum XB1 - Technical Help & Support
    Replies: 2
    Last Post: 28-05-2015, 22:43
  4. Stalling when activating clutch
    By Falconeye in forum General Discussion
    Replies: 5
    Last Post: 08-05-2015, 19:40
  5. PS4 - Unable to Assign 'X' as throttle
    By Jimmay in forum PC - Technical Help & Support
    Replies: 4
    Last Post: 08-05-2015, 12:00

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •