Page 2 of 416 FirstFirst 12341252102 ... LastLast
Results 11 to 20 of 4156

Thread: Jack Spade - FFB Tweaker Files

  1. #11
    WMD Member Lars Rosenquist's Avatar
    Join Date
    Oct 2011
    Location
    The Netherlands
    Posts
    295
    Platform
    PC
    Quote Originally Posted by Raeang View Post
    Hi there...Is there a way to use these tweaks on a PS4?
    Yes, by reading the XML file and entering the values by hand. A bit cumbersome, but doable. I'm pretty sure some of us will come up with a more readable format in the future.
    PC: i7-4790k/16GB/GTX970 4GB/Z97-PRO/Logitech G27/Xbox 360 Controller
    Laptop: i7-6700HQ/16GB/GTX1070 8GB/Xbox One Controller
    LT Profiler: Strength: 100% - Spring 0% - Damper 0% - Center Spring 0% - 900 degrees - game can change

  2. #12
    Rookie DRTDXBOX's Avatar
    Join Date
    May 2015
    Location
    Bogotá
    Posts
    4
    Hi

    I am not speak english so well buy try.

    I want to know how can I set the configuration of forces and efects of Project Cars for FEEL STRONGER THE VIBRATION AND FEEL THE SESATION OF THE KERBS on my Tx 458 Italy Thrustmaster Wheel.

    I have Tx with Clubsport V2 pedals Fanatec and TH8A Thrustmaster working like a HandBrake.

    My Pc have i7 4790K
    Board Gigabyte Z97 MX GAMING 5
    Hard Disk 1TB
    DDR3 16GB 1600MHZ
    NVIDIA EVGA 970 GTX 4GB SC

    Look my settings:

    MY Tx.
    http://steamcommunity.com/sharedfile.../?id=440125832

    Tx, CSV2 and TH8A
    http://images.akamai.steamuserconten...1374A53CAD8A6B

    I was setting the configuration like this:

    Force Feedback.....40 because I dont want that the wheel forces me to the center o 0 grades....look:

    http://steamcommunity.com/sharedfile.../?id=440126118

    http://steamcommunity.com/sharedfile.../?id=440126273

    Th configuration of FFB:

    http://steamcommunity.com/sharedfile.../?id=440126424

    http://steamcommunity.com/sharedfile.../?id=440126606

    And for example, a configuration with a car:

    http://steamcommunity.com/sharedfile.../?id=440126711

    http://steamcommunity.com/sharedfile.../?id=440126872

    http://steamcommunity.com/sharedfile.../?id=440127018

    http://steamcommunity.com/sharedfile.../?id=440127193

    With all these settings I dont happy with the sensation on my Tx about de efects of the KERBS, the VIBRATION is nice but I want more.

    I need to know how a put more sensation for the KERBS on the Tx and more VIBRATION of the efects.

    The levels and efects that I set is well o I made a mistake???


    Please, help me, it is possible in Spanish will better.

    Thanks a lot

    Nice to meet you.

    Dave
    DRTDXBOX
    email: drtdxbox@hotmail.com

  3. #13
    WMD Member
    Join Date
    May 2015
    Posts
    882
    Platform
    PC
    try these settings dave, just follow the instructions & drop the FFB folder in your my documents/pcars folder. there is very good curb feel, at least with the pack im using (the SoP one)
    Thrustmaster TX/CSR Elites/TH8a Shifter
    980OC/5820k@4.5/8GB DDR4@2400(stock)/WINDOWS 10

  4. #14
    WMD Member Steffen Sorensen's Avatar
    Join Date
    Oct 2011
    Location
    Denmark
    Posts
    9
    Platform
    PC
    Quote Originally Posted by Jack Spade View Post
    Iīve been asked by WMD members to post my FFB Tweaker Files here in this new forum too..... here they are

    What is it?

    Itīs a text file (xml) containing the same parameters you find on the individual Car Setup FFB Pages. Once the tweaker files are activated the
    game ignores just the FFB settings on these pages. There is an optimized individual file for each and every car.

    In pCARS FFB is directly derivated from the individual car/tire physics hence universal, so the files will work on any type of wheel.
    Itīs the core of FFB, if something is out of tune here it canīt be corrected by the wheel preset parameters later down the line, this is the most
    important part of FFB tuning. BTW the SMS guys did a great job developing the car and tire physics and all other stuff for this game.

    This FFB system enables you to tune all important physical forces that occur. Itīs a great system, but there are a few traps or oddities that
    must be considered. As a long-time WMD member I constantly followed game development and adjusted the files accordingly numerous times,
    so learning about the stuff and how to make it really work well despite the traps and oddities probably most of you are unaware of.

    How do I use the files?

    The posting contains 2 different sets of files - Standard and Fy+Soplateral Mix
    Inside a folder called "FFB". This folder must go in > My Documents/Project CARS .....Note, only one FFB folder at a time.

    The tweaker files get activated by just starting the game. - Again, the car FFB setup pages are ignored. You can deactivate the files by renaming
    the FFB folder.

    Whatīs the difference between the sets?

    1. Standard - classic parameters Fx,Mz,Fy,Fz - but additional SopDiff. bumps/kerbs/road feel from the rear tires, solves phase issues.

    2. Fy+SopLateral Mix - side load mix (front/rear) 2/3 + 1/3 by forces not by numbers. FFB feels slightly different but gives more feel what the
    rear of the car is doing, all other parameters as Standard.

    Note: I prefer the latter.

    In combo with the following global FFB settings, the files are designed to transmit an optimized FFB signal of the individual car to the wheel
    avoiding FFB clipping to a great extend. There still is some clipping when you hold the wheel at 45-90 degrees turning angle and drive on high
    kerbs. In this case strong forces occur at the same time causing the bumps/kerbs signals to clip slightly, but still acceptable.
    What you see on the FFB monitor is transmitted to the wheel. I donīt recommend to increase Tire Force cause FFB signals are already close to
    the limit.

    Global FFB settings: FFB = 100, Tire Force = 100 -> Very important, FFB ALWAYS at 100 any wheel!

    Force Feedback Calibration Page:

    Relative Adjust Gain 1.10 (1.00 okay also)
    Relative Adjust Bleed 0.10
    Relative Adjust Clamp 0.95

    Deadzone Removal Range: is wheel depending....as a CSW v2 user I have it at 0.

    CSW v2 users who like it really clean without force loss try this: Tire Force = 70, FOR = 140

    The files are PC only, but the parameter values can be converted for all platforms - multiplicator 100


    Attachment 200998

    Lykan Hypersport added to complete the list, no other changes.
    Nice job - thanks
    PC Spec:
    Windows 7 Sp1| Asrock Z68 Extreme4 GEN3 Z68| Intel Core i7-2600 3.4 GHz| Kingston HyperX 16 GB 1600 Mhz DDR3| HIS Radeon HD 7970 3GB GDDR5/No OC.| Auzen X-Fi Bravura 7.1| Sennheiser HD650| Fanatec CSW + Formula Rim + Porsche 918 RSR Rim +Universal Hub with G25 Rim +CSP V2|Shifter: ClubSport SQ EU|Handbrake G25 Shifter with Bodnar shifter interface USB|Logitec G13|Asus MX279 1920x1080 + 2 x LG 27EB22 1920x1080|PSU: Corsair TX850|Thermaltake Level 10 GT|

  5. #15
    Superkart Pilot
    Join Date
    May 2015
    Posts
    164
    Second set is very good. Thanks.
    However one question. Why the Lock spring is disabled?

  6. #16
    WMD Member TrevorAustin's Avatar
    Join Date
    May 2015
    Location
    Rio
    Posts
    2,668
    Platform
    PC
    Absolutely transformed the feel of the game, like a different game!
    MSI X99 Gaming 7, 16GB Hyper-X XMP Predator EVGA SC ACX 2 980Ti 1252/1446 boost ram 7776Ghz 64deg max, I7 5820K running at 4.6Ghz 60deg max, Corsair RM850, Thrustmaster T500RS and F1/T28 leather rim, Windows 8.1, Rift dk2, gt omega rs6 pro, 1080p triples bezel corrected to 6080*1080, Game settings at max except in-game AA, Nvidia inspector/maxwell AA on/transparency on/32*CSAA/8*SGSS/FXAA on, sim vibe chassis/4*Reckhorn 200s 200 watt Onkyo Amp.
    The following user likes this Post: yusupov


  7. #17
    Superkart Pilot
    Join Date
    May 2015
    Posts
    120
    Platform
    PC
    I never drive a formula car in real life, so don't know how it feel in handling...I had try formula A in game with sop pack, feel the wheel much light than GT3 car, is that right?

  8. #18
    WMD Member
    Join Date
    Nov 2011
    Posts
    194
    Platform
    PC
    Nice job on the ffb files as usual.

  9. #19
    Moderator GTsimms's Avatar
    Join Date
    May 2015
    Location
    Louisiana
    Posts
    543
    Platform
    PC
    Working good with CSR with stock setting expect as posted above
    Relative Adjust Gain 1.10 (1.00 okay also)
    Relative Adjust Bleed 0.10
    Relative Adjust Clamp 0.95

  10. #20
    WMD Member
    Join Date
    May 2015
    Posts
    882
    Platform
    PC
    Quote Originally Posted by townnet View Post
    I never drive a formula car in real life, so don't know how it feel in handling...I had try formula A in game with sop pack, feel the wheel much light than GT3 car, is that right?
    idk about irl either, but in sims yes, usually formula cars are much lighter steering. be careful tho bc if you make it heavier at high speed you might end up with a lot of clipping.
    Thrustmaster TX/CSR Elites/TH8a Shifter
    980OC/5820k@4.5/8GB DDR4@2400(stock)/WINDOWS 10

Similar Threads

  1. Where is the image files for the highlight photos?
    By DoodlesSWE in forum General Discussion
    Replies: 5
    Last Post: 12-05-2015, 18:15

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •