Results 1 to 4 of 4

Thread: Help for Oculus Rift

  1. #1
    Rookie
    Join Date
    Jun 2016
    Posts
    2
    Platform
    PC

    Help for Oculus Rift

    Hello, Iím an owner of the Oculus Rift.
    I have the PCars Version out of the Oculus store and the PCars over Steam. (And also a PS4 Version)

    The Oculus Version seems to have always blur on the screen, it is not as expected.
    So this Version have also some problems for detecting the One Controller and it is only in English.
    If Pcars recognize the controller I t is fully functional and I can adjust the Graphics always on max.
    I have 2 GTX980 via SLI.

    The Steam PCars is in my favourite Language and seem to be more patched.
    It starts with answering the Oculus Question in Oculus mode.

    All intro and Adjusting Screens works fine and the One controller is always identified.
    Good.
    But, if the drive starts I have so much clipping that I cannot drive through the course.
    3D seems to be OK, even when I not drive. Some light effects seems to be much intense then in the Oculus version. I think the resolution is much better then in Oculus Version.
    But, if I move my head the outside environment is completely disordered, some lines will clip, some objects are disarranged and on wrong position. It look like that the two eye displays are not synchronised.

    I have made some experiences with the graphics parameter, reduce all parameters to be clear that it is not a performance problem. But the clipping is always there.

    If I end the Steam Version and start the Oculus Version, it works fine but blur.
    So, what can I do. I hope that someone can tell me, how to adjust the Graphics so that this clipping disappear. Does someone have experiences with the Oculus Rift?

  2. #2
    WMD Member beetes_juice's Avatar
    Join Date
    May 2015
    Location
    VA
    Posts
    1,048
    Platform
    PC
    What do you mean by clipping? Driver view is clipping into the drivers body? Map VR center to a button and use that to center yourself.

    Pcars isint very SLI friendly so I've read. I would try one GPU with the steam version and see if your issue persists.
    Project CARS 2 Driver Eye Youtube Playlist
    Current Rig: Monitor: Sharp 42" LED | VR: Oculus Rift CV1 | CPU: i7-6700k @ 4.0GHz | GPU:STRIX 1080TI OC | MB: ASUS Z170 PRO GAMING | Drives: Samsung 850 EVO 500 GB M.2 + Samsung 850 EVO 500GB SSD + WD BLACK SERIES 1TB 3.5 | RAM: Corsair Vengeance LPX 16GB @ 3200MHz | Case: Phanteks Enthoo Pro | PSU: EVGA 850W G2 80+GOLD
    Hardware: Wheel: FAN PC HUB | Pedals: FAN V2 | Rim: FAN GT US

  3. #3
    GT4 Pilot AbeWoz's Avatar
    Join Date
    May 2015
    Location
    New York
    Posts
    2,583
    Platform
    PC
    VR in general is not SLI friendly either.
    ***ALL MY TIRE RELATED DISCUSSION ARE REFERRING TO MODERN GT/LMP TIRES***
    PC Rig: intel i7-6700k @ 1.21 gigawatts of electricity | Gigabyte Z170X G1 Gaming | EVGA 1080 Ti SC2 Gaming | Fanatec CSL Elite Base | CSL Elite Load-Cell Pedals | Formula F1 2018 Wheel
    Other endeavours: lacrosse, hockey, snowboarding, DCS F/A-18C

  4. #4
    Rookie
    Join Date
    Jun 2016
    Posts
    2
    Platform
    PC
    The objects outside the Car are confusing in place and order.
    E.g. Tribune, the object lines clipping in any direction when the head is moved.

    The Oculus Version run fine with SLI. No Problems but very, very better thean with one GPU.
    The Steam Version looks even better but have this clipping.

    I think, generallities and Statements without using this Hardware does not help.

Similar Threads

  1. Oculus Rift Bug
    By megascolidae in forum Virtual Reality Devices Support
    Replies: 6
    Last Post: 30-06-2016, 21:38
  2. Help with Oculus Rift
    By jst in forum Virtual Reality Devices Support
    Replies: 8
    Last Post: 28-05-2016, 19:47
  3. Oculus Rift DK1
    By MonsterJoe in forum PC - Technical Help & Support
    Replies: 4
    Last Post: 10-06-2015, 19:10
  4. OCULUS RIFT DK2
    By ekortal in forum PC - Technical Help & Support
    Replies: 2
    Last Post: 21-05-2015, 06:55
  5. Oculus rift DK 2
    By SalivanT in forum XB1 - Technical Help & Support
    Replies: 1
    Last Post: 10-05-2015, 10:42

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •