Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Thrust master TMX issues after crashing any car

  1. #1
    Kart Driver
    Join Date
    May 2015
    Location
    Scotland
    Posts
    27
    Platform
    XBOX1

    Thrust master TMX issues after crashing any car

    So this is driving me crazy because I really enjoyed the game using an Xbox controller.

    If I spin out. Hit a wall/barrier and stop dead my wheel goes nuts. Tries to recenter itself. Gets locked up turned full lock either direction and starts knocking.

    I can't reverse as wheel tries to correct itself and wheel fully rotates itself and knocking...So frustrating.

    Works great with assetto corsa. Dirt rally. F1 2015...Even forza horizon 3.

    Extra annoying as Pcars I have stuck by since initial release and was the main reason for buying the wheel.

    Any ideas as I can not play one of my all time favourite racing games now....Wheel is calibrated fine..How do u reduce the force of wheel recentring?

  2. #2
    Kart Driver
    Join Date
    May 2015
    Location
    Scotland
    Posts
    27
    Platform
    XBOX1
    Someone....Anyone......?��

  3. #3
    Moderator Mahjik's Avatar
    Join Date
    Oct 2011
    Location
    Kansas City, MO
    Posts
    5,097
    Platform
    PC
    Can you provide the in-game FFB settings you are using?
    Intel i7-4790K @4.4GHz | 16gb ram | 2x EVGA GTX 970 | 5040x1050 | Windows 8.1 64-bit | Thrustmaster TX Servo Base | Thrustmaster TH8A Shifter
    ProtoSimTech PT-1 Pedals | rSeat Evo V2 | 2x Buttkickers | SimVibe | Black Max II Button Controller | Sennheiser PC 360 Headset


    Forum Rules
    Known Issues

  4. #4
    Superkart Pilot Mowzer's Avatar
    Join Date
    May 2015
    Location
    Bristol UK
    Posts
    250
    Platform
    XBOX1
    This site has some good wheel settings . http://pcars.oscarolim.pt/cars
    On reading your Op i was just thinking maybe you have the Tyre force set high? I maybe wrong as im new to using the wheel myself .
    I never lose i just merely run out of laps,fuel or time

  5. #5
    Kart Driver
    Join Date
    May 2015
    Location
    Scotland
    Posts
    27
    Platform
    XBOX1
    Will try that mowzer ��

    As for setting I've tried many...Does it on default as well and that's how it is just now.

    The driving is ok but whenever I get hit and crash or slide and start spinning....By the time I'm pointing in right direction I'm well behind.

  6. #6
    Kart Driver
    Join Date
    May 2015
    Location
    Scotland
    Posts
    27
    Platform
    XBOX1
    Mowzer u are my favourite person in the whole wide Web just now.....Thank you....Turned to 10...It was default 100...Gonna try 20-50 range as it's a bit light.

    Same problem has arisen....:-(

    Soon as I crash and try and recover the wheel just takes control....I reverse wheel turns itself full lock...Move forward again and rinse repeat...Can't recentring and continue race....Will keep looking
    Last edited by monz; 18-01-2017 at 15:53.

  7. #7
    Moderator Mahjik's Avatar
    Join Date
    Oct 2011
    Location
    Kansas City, MO
    Posts
    5,097
    Platform
    PC
    What are you using for the Deadzone Removal Range?
    Intel i7-4790K @4.4GHz | 16gb ram | 2x EVGA GTX 970 | 5040x1050 | Windows 8.1 64-bit | Thrustmaster TX Servo Base | Thrustmaster TH8A Shifter
    ProtoSimTech PT-1 Pedals | rSeat Evo V2 | 2x Buttkickers | SimVibe | Black Max II Button Controller | Sennheiser PC 360 Headset


    Forum Rules
    Known Issues

  8. #8
    Superkart Pilot Mowzer's Avatar
    Join Date
    May 2015
    Location
    Bristol UK
    Posts
    250
    Platform
    XBOX1
    Ive cut my Force feed back to 75 on my Logitech as i was finding hard to hold on to the wheel to be honest .
    I never lose i just merely run out of laps,fuel or time

  9. #9
    Superkart Pilot gotdirt410sprintcar's Avatar
    Join Date
    May 2015
    Location
    OHIO
    Posts
    771
    Platform
    PS4
    Per wheel movement settings set wrong can cause the wheel too do what your saying. On my t500 I have per wheel movement at +0 3 per wheel movement squared at -01. If you have these set wrong your wheel will want to take off on you.

  10. #10
    Kart Driver
    Join Date
    May 2015
    Location
    Scotland
    Posts
    27
    Platform
    XBOX1
    K....Solved it.

    Happening to all vehicles so had to b something in basic config in the control menu.

    Force feedback set to 100 as default.

    Reduced to 50 and now 35% and consistently ran M1 at Brno. Recovered great from any crashes or spins. Big smile on face at this point btw....

    Tried Caterham at Brno...Quick race... Recovered fine from any incident.

    I think that default setting of 100 in ffb should be patched to 40 as I reckon that default causes many new wheel users a problem....Anyhoo it's resolved which is the main thing.
    The following user likes this Post: Mowzer


Similar Threads

  1. Xbox One League Master Thread
    By AbeWoz in forum XB1 - Multiplayer Event Planning
    Replies: 25
    Last Post: 24-04-2017, 17:29
  2. Thrust Master t150 wheel calibration on PC?
    By yoyooz in forum PC - Technical Help & Support
    Replies: 1
    Last Post: 04-09-2016, 08:43
  3. Thrust master t100 no power
    By cunningham85 in forum General Discussion
    Replies: 11
    Last Post: 05-01-2016, 19:42
  4. Thrust master TX Headset Compatibility?
    By EX0TiC in forum XB1 - Technical Help & Support
    Replies: 9
    Last Post: 09-06-2015, 19:44

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •