Results 1 to 10 of 20

Thread: Thrustmaster Settings T150 RS & T300 RS (+Fanatec CSR & GT3 RS V2)

Threaded View

  1. #1
    WMD Member GTsimms's Avatar
    Join Date
    May 2015
    Location
    Louisiana
    Posts
    303
    Platform
    PC

    Thrustmaster Settings T150 RS & T300 RS (+Fanatec CSR & GT3 RS V2)

    Since, I was on the WMD side of things this time for Project CARS 2!

    Flavours (Informative, Immersive, Raw, Custom)

    1. GAIN 100 (Adjust for Immersive only or Consoles not having the control panel like PC versions)
    2. Volume 50 (Adjust this with Flavours and not Gain on the PC Version, Immersive affects the wheel weight light/heavy)
    3. Tone 50 (Default is good)
    4. FX 50 (0 also produces effects)


    After much testing and in VR with the Oculus Rift CV1. Here are my default test settings on the PC version! (Initial Test Vehicle BMW 1 M, Nordschleife and California HWY Reverse)

    [Control Panel at Default (PC only) and Game Configuration Menu Defaults]

    THRUSTMASTER T150 (2x T150'S) & T300 RS (TMCP default) Raw Gain 100 / Vol 20 / Tone 50 / FX 0 or 14 (or higher FX with T300 {just smooth out the ffb signal!} and T150 can use Vol 18 with FX)
    FANATEC CSR Raw Gain 100 / Vol 40 / Tone 50 / FX 36 (SEn/OFF, FF/100, Sho/0, dri/off, Abs 65 or your preference, Lin 0, dEA/0, SPr/0, dPr/0)
    FANATEC GT3 RS V2 Raw or Informative Gain 100 / Vol 22 / Tone 50 / FX 42 (SEn/OFF, FF/100, Sho/80, dri/OFF, Abs 65 or your preference, Lin 0, dEA/0, SPr/0, dPr/0)


    Edit: You can try these (9/20/2017) I was planning on doing an update, but here you go after being ninja'd on somethings. Here is the link
    http://forum.projectcarsgame.com/sho...-cars-and-tips


    Note: Flavours of Informative, Raw, and Custom can use the same settings! I will definitely need to revisit the Fanatec wheels as my time was limited. They should be a good start with Volume. EdIt: (19/9/2017) The T300 can use higher FX. The settings provided here may not work with every wheel. I will normally run FX @ 0 in VR.

    Win 10 Home 64bit ASUS Prime Z270-A/i7 7700K 4.5 GHz, 32 GB GSKILL Trident White 3200, EVGA SC GTX 1070 (MSI AfterBurner 109/89/124/425) Oculus Rift CV1 (VR Cover for eyewear)
    Project CARS 1 SettingsT150 RS and T300 RS
    Last edited by GTsimms; Today at 13:04.
    WMD2 Member
    Project CARS 2 T150 & T300 RS (TMCP default) Raw Gain 100 / Vol 20 (T150 or Vol 18 with FX 14) / Tone 50 / FX 0 or 14 with FANATEC HANDBRAKE V1.0
    Win 10 Home 64bit ASUS Prime Z270-A/i7 7700K 4.5 GHz, 32 GB GSKILL Trident White 3200, EVGA SC GTX 1070 (MSI AfterBurner 109/89/124/425) Oculus Rift CV1 (VR Cover for eyewear)
    The following 8 users likes this Post: Boskapongen, IceShaft, jim jonez, poirqc, Rossi46 (NL), RU486, SGETI, VelvetTorpedo


Similar Threads

  1. PS4 SPECIFIC SETTINGS - Thrustmaster T150
    By sroc3 in forum Project CARS on Playstation 4
    Replies: 0
    Last Post: 03-07-2017, 18:36
  2. Fanatec CSR Elite pedals with Thrustmaster T150
    By BigDad in forum PS4 - Technical Help & Support
    Replies: 3
    Last Post: 14-06-2016, 15:34
  3. Thrustmaster T150 or T300?
    By MillsLayne in forum PS4 - Technical Help & Support
    Replies: 4
    Last Post: 04-04-2016, 02:06
  4. Thrustmaster t150 or t300
    By Theritcha in forum PS4 - Technical Help & Support
    Replies: 7
    Last Post: 25-03-2016, 12:17
  5. Upgrade thrustmaster T100 to T150 or T300?
    By Xtince in forum Project CARS on Playstation 4
    Replies: 8
    Last Post: 24-11-2015, 16:39

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •