Page 1 of 9 123 ... LastLast
Results 1 to 10 of 81

Thread: Thrustmaster Settings T150 RS & T300 RS (+Fanatec CSR & GT3 RS V2)

  1. #1
    Moderator GTsimms's Avatar
    Join Date
    May 2015
    Location
    Louisiana
    Posts
    992
    Platform
    PC

    Thrustmaster Settings T150 RS & T300 RS (+Fanatec CSR & GT3 RS V2)

    Since, I was on the WMD side of things this time for Project CARS 2! Note: may not work with every wheel.

    Thrustmaster recommends not setting the TMCP higher than 60
    1. GAIN 100 (Adjust for Immersive only or Consoles not having the control panel like PC versions)
    2. Volume 50 (Adjust this with Flavours and not Gain on the PC Version, Immersive affects the wheel weight light/heavy)
    3. Tone 50 (Default is good)
    4. FX 50 (0 also produces effects)


    I use the following settings with these wheels to keep the ffb graph even (give auto tune on immersive/informative a few laps)
    T150 Raw 100/50/50/0-25 zero is normal Thrustmaster Control Panel Gain 38-40 or what works for you
    T300 Raw 100/50/50/0 Thrustmaster Control Panel 1080 Gain 41
    Fanatec CSR Raw (100/43-45/50/15 or you could leave at defualts and try lowering on the wheel) (SEn/OFF, FF/100, Sho/0, dri/off, Abs 65 or your preference, Lin 0, dEA/0, SPr/0, dPr/0)
    GT3 RS V2 Informative (100/40-42/50/16) Raw (100/40-42/50/16) (SEn/OFF, FF/100, Sho/100, dri/OFF, Abs 65 or your preference, Lin 0, dEA/0, SPr/0, dPr/2)




    FFB Video by Yorkie065



    Help: If your wheel is not recognized in game. Reset your wheel or is some cases delete the Documents/Project CARS 2 folder! (Control Scheme and Reset to Defaults) WMD2 important here, delete your C:\ProgramData\Slightly Mad Studios folder the main reason for all of my ffb issues having a folder with files dating back to May 2017. 11/24/2017

    Project CARS 1 Settings T150 RS
    and T300 RS
    Last edited by GTsimms; 20-02-2018 at 10:38.
    Project CARS 2 T150 & T300 RS
    PC's used during WMD 2
    PC 1 Win 10 Home 64bit MSI 970 Gamer/FX-8350(4.2), 16GB Crucial, Sapphire R9 290 Tri-X OC (MSI AfterBurner 1100 and 1425)
    PC 2 Win 10 Home 64bit ASUS Prime X370-Pro/Ryzen 7 1700X 3.77 GHz, 32 GB Corsair Veng 3200 @ 2933,
    MSI GAMING X GTX 1070 (MSI AfterBurner 120/89/137/425)
    PC 3 Win 10 Home 64bit ASUS Prime Z270-A/i7 7700K 4.5 GHz, 32 GB GSKILL Trident White 3200, EVGA SC GTX 1070 (MSI AfterBurner 109/89/124/425) Oculus Rift CV1 (VR Cover for eyewear)

  2. #2
    GT4 Pilot
    Join Date
    May 2015
    Posts
    2,644
    Platform
    PC
    Noooo!

    pCars 2 is doomed! The game's not even out yet and there's already a thread about fixing the FFB!
    All platform and wheels: Official Force Feedback Guide
    Info: pCars 2 Tire Pressure Official Guideline | Wheel FFB guide

    Steering: G27 | My In-game FFB:Informative 98/40/45/3
    The following 4 users likes this Post: Eric Rowland, GrimeyDog, morpwr, sherpa25


  3. #3
    WMD Member
    Join Date
    Mar 2012
    Location
    Sydney
    Posts
    187
    Platform
    PC
    Haha, FFB is fine, people like to tune things to their tastes, its much simpler in PCars 2 however detail has been left in for the HCore tweakers to get it exactly how they like it.

    I was using a custom FFB file, but in the past month was using the defaults for my G29 setup and it was great - Just pushed up the FX slider so i could get more road surface feedback.
    The following 3 users likes this Post: GrimeyDog, poirqc, sasquatch98


  4. #4
    Moderator GTsimms's Avatar
    Join Date
    May 2015
    Location
    Louisiana
    Posts
    992
    Platform
    PC
    Quote Originally Posted by poirqc View Post
    Noooo!

    pCars 2 is doomed! The game's not even out yet and there's already a thread about fixing the FFB!
    How, there are only 2 options really volume and fx! This is not fixing ffb, only adjusting the range for a specific wheel. Every wheel cannot handle the default settings like the CSW 2.5 and DD's.
    Project CARS 2 T150 & T300 RS
    PC's used during WMD 2
    PC 1 Win 10 Home 64bit MSI 970 Gamer/FX-8350(4.2), 16GB Crucial, Sapphire R9 290 Tri-X OC (MSI AfterBurner 1100 and 1425)
    PC 2 Win 10 Home 64bit ASUS Prime X370-Pro/Ryzen 7 1700X 3.77 GHz, 32 GB Corsair Veng 3200 @ 2933,
    MSI GAMING X GTX 1070 (MSI AfterBurner 120/89/137/425)
    PC 3 Win 10 Home 64bit ASUS Prime Z270-A/i7 7700K 4.5 GHz, 32 GB GSKILL Trident White 3200, EVGA SC GTX 1070 (MSI AfterBurner 109/89/124/425) Oculus Rift CV1 (VR Cover for eyewear)
    The following 2 users likes this Post: poirqc, rocho


  5. #5
    GT4 Pilot
    Join Date
    May 2015
    Posts
    2,644
    Platform
    PC
    Quote Originally Posted by drathuu View Post
    Haha, FFB is fine, people like to tune things to their tastes, its much simpler in PCars 2 however detail has been left in for the HCore tweakers to get it exactly how they like it.

    I was using a custom FFB file, but in the past month was using the defaults for my G29 setup and it was great - Just pushed up the FX slider so i could get more road surface feedback.
    Quote Originally Posted by GTsimms View Post
    How, there are only 2 options really volume and fx! This is not fixing ffb, only adjusting the range for a specific wheel. Every wheel cannot handle the default settings like the CSW 2.5 and DD's.
    I know there's nothing to fix!

    I was just wearing the doomsayer hat! Someone has to do it!
    All platform and wheels: Official Force Feedback Guide
    Info: pCars 2 Tire Pressure Official Guideline | Wheel FFB guide

    Steering: G27 | My In-game FFB:Informative 98/40/45/3
    The following 3 users likes this Post: GrimeyDog, GTsimms, morpwr


  6. #6
    Moderator GTsimms's Avatar
    Join Date
    May 2015
    Location
    Louisiana
    Posts
    992
    Platform
    PC
    TBH! It was an accidental post, yesterday.
    Project CARS 2 T150 & T300 RS
    PC's used during WMD 2
    PC 1 Win 10 Home 64bit MSI 970 Gamer/FX-8350(4.2), 16GB Crucial, Sapphire R9 290 Tri-X OC (MSI AfterBurner 1100 and 1425)
    PC 2 Win 10 Home 64bit ASUS Prime X370-Pro/Ryzen 7 1700X 3.77 GHz, 32 GB Corsair Veng 3200 @ 2933,
    MSI GAMING X GTX 1070 (MSI AfterBurner 120/89/137/425)
    PC 3 Win 10 Home 64bit ASUS Prime Z270-A/i7 7700K 4.5 GHz, 32 GB GSKILL Trident White 3200, EVGA SC GTX 1070 (MSI AfterBurner 109/89/124/425) Oculus Rift CV1 (VR Cover for eyewear)
    The following user likes this Post: poirqc


  7. #7
    Kart Driver hardlock's Avatar
    Join Date
    Mar 2017
    Location
    Oregon
    Posts
    55
    Platform
    PC
    Couldn't find any info on the Thrustmaster T150 except here and am in the market for a reasonable priced FFB wheel. Any pCAR user reviews for it? Thanks!

  8. #8
    Moderator GTsimms's Avatar
    Join Date
    May 2015
    Location
    Louisiana
    Posts
    992
    Platform
    PC
    It's a good wheel for the price and better with the T3PA-PRO pedal set!
    Project CARS 2 T150 & T300 RS
    PC's used during WMD 2
    PC 1 Win 10 Home 64bit MSI 970 Gamer/FX-8350(4.2), 16GB Crucial, Sapphire R9 290 Tri-X OC (MSI AfterBurner 1100 and 1425)
    PC 2 Win 10 Home 64bit ASUS Prime X370-Pro/Ryzen 7 1700X 3.77 GHz, 32 GB Corsair Veng 3200 @ 2933,
    MSI GAMING X GTX 1070 (MSI AfterBurner 120/89/137/425)
    PC 3 Win 10 Home 64bit ASUS Prime Z270-A/i7 7700K 4.5 GHz, 32 GB GSKILL Trident White 3200, EVGA SC GTX 1070 (MSI AfterBurner 109/89/124/425) Oculus Rift CV1 (VR Cover for eyewear)

  9. #9
    Moderator Aldo Zampatti's Avatar
    Join Date
    Apr 2012
    Location
    Ushuaia, Argentina - Santiago, Chile
    Posts
    1,779
    Platform
    PC
    Quote Originally Posted by poirqc View Post
    Noooo!

    pCars 2 is doomed! The game's not even out yet and there's already a thread about fixing the FFB!

    It's all about customization/personalization. Me personally I use the "immersive" option out of the box.
    Systems tested with Project CARS 2:
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Core i7 4790K - nVidia GTX 1080ti - 16GB RAM (Desktop)
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Core i7 7700HQ - nVidia GTX 1050 - 16GB RAM (Laptop)
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Core i7 6700HQ - nvidia GTX 980m - 8GB RAM (Laptop)
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Core i5 4670K - 2x AMD 7970 - 16GB RAM (Desktop)
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Core i7 4700HQ - nVidia 970M - 16GB RAM - (Laptop)
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    The following user likes this Post: poirqc


  10. #10
    GT4 Pilot
    Join Date
    May 2015
    Posts
    2,644
    Platform
    PC
    Quote Originally Posted by Aldo Zampatti View Post
    It's all about customization/personalization. Me personally I use the "immersive" option out of the box.
    I know, look at the wheel thread in my signature. i was just poking GTSimms.
    Last edited by poirqc; 20-09-2017 at 10:57.
    All platform and wheels: Official Force Feedback Guide
    Info: pCars 2 Tire Pressure Official Guideline | Wheel FFB guide

    Steering: G27 | My In-game FFB:Informative 98/40/45/3
    The following user likes this Post: Aldo Zampatti


Similar Threads

  1. PS4 SPECIFIC SETTINGS - Thrustmaster T150
    By sroc3 in forum Project CARS on Playstation 4
    Replies: 0
    Last Post: 03-07-2017, 18:36
  2. Fanatec CSR Elite pedals with Thrustmaster T150
    By BigDad in forum PS4 - Technical Help & Support
    Replies: 3
    Last Post: 14-06-2016, 15:34
  3. Thrustmaster T150 or T300?
    By MillsLayne in forum PS4 - Technical Help & Support
    Replies: 4
    Last Post: 04-04-2016, 02:06
  4. Thrustmaster t150 or t300
    By Theritcha in forum PS4 - Technical Help & Support
    Replies: 7
    Last Post: 25-03-2016, 12:17
  5. Upgrade thrustmaster T100 to T150 or T300?
    By Xtince in forum Project CARS on Playstation 4
    Replies: 8
    Last Post: 24-11-2015, 16:39

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •