Page 3 of 24 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 232

Thread: Thrustmaster TX FFB settings?

  1. #21
    Kart Driver Foolsjester's Avatar
    Join Date
    May 2015
    Location
    London
    Posts
    48
    Platform
    XBOX1
    Quote Originally Posted by snipeme77 View Post
    So guys the TX series of wheels ARE working in Pcars 2?

    Yes and better feeling than PC1 with tyre flex model
    Xbox One X
    TX wheel base - SparcoŽ R383 wheel
    T3PA peddels with bodin load cell
    TH8A Shifter with ricmo tech quick shift plate
    Playseat challenge

  2. #22
    Superkart Pilot Rockefelluh's Avatar
    Join Date
    May 2015
    Location
    California, U.S.
    Posts
    543
    Platform
    XBOX1 X
    Quote Originally Posted by nissan4ever View Post
    You talking about with the Thrustmaster TX F1 add on rim? The rim on the TX wouldn't matter. But if the calibration was done incorrectly, then that could be it. Remember, for the first step. Turn the wheel full lock without forcing it to go further. Hit A Button. For the 90° calibration. Your TX base needs to be on default 900°. On screen, turn your wheel till you see 900. Hit A Button. That's it & correct calibration.

    The game does soft lock to adjust DOR by the car. On top of that in tuning, you can adjust steering ration by car even further. There's just no reason to take your Thrustmaster TX off of default 900°.

    Side note, the rim I'm currently using is in my profile picture. Later today, I'll put on my F1 Rim & do some runs in Formula, Indy & Lmp1. I'll see how it goes. Should be fine & no different than what I experienced with my other TX rim.

    UPDATE I ran the Audi 18 e-tron at 24hr Le Mans. F1 rim was fine.
    Attachment 240337
    I'm a dunce and can't find the calibration screen anywhere. Help a brother out!

  3. #23
    GT5 Pilot Dynomight Motorsports's Avatar
    Join Date
    May 2015
    Location
    ..in the Kitty Litter.
    Posts
    1,037
    Platform
    XBOX1
    Quote Originally Posted by Foolsjester View Post
    Raw
    100 - shouldn't adjust this
    49 - adjust this for weight of wheel
    22
    45
    Will try this tonight.. been a little put off by the complexity of a whole new game. Kinda wish they would have kept some stuff the same.
    ________________________________________________________________________________________
    RACEDEPARTMENT.com
    Largest SIM Racing Community Online / Competitive & Clean Drivers / XBOX Leagues Now
    Xbox1 GT World Endurance Challenge<<---Link!!!
    GamerTag: MichaeI Watts

  4. #24
    Kart Driver
    Join Date
    Jun 2015
    Location
    the 405
    Posts
    14
    Platform
    XBOX1
    Quote Originally Posted by snipeme77 View Post
    So guys the TX series of wheels ARE working in Pcars 2?
    Mine has worked just fine, no issues at all.

  5. #25
    GT4 Pilot nissan4ever's Avatar
    Join Date
    May 2015
    Location
    East Coast
    Posts
    2,079
    Platform
    XBOX1 X
    Quote Originally Posted by Rockefelluh View Post
    I'm a dunce and can't find the calibration screen anywhere. Help a brother out!
    Go to options. Select controller (upper far right). Scroll down & select calibrate wheel. After doing that, calibrate your pedals. They're next option below wheel calibration.
    Project CARS 2 - Gold Member
    Xbox One X/Seagate USB 3.0 4TB/Netgear Nighthawk x6 AC3200/Thrustmaster TX/TM Leather 28 GT Rim/Wheel Stand Pro Deluxe V2/T3PA Pedals/Turtle Beach Elite Pro 2 + Superamp Pro/LG 43UH6500 4K UHD HDR Game Mode
    The following user likes this Post: Rockefelluh


  6. #26
    Kart Driver bennoj61's Avatar
    Join Date
    Jul 2016
    Location
    Seattle
    Posts
    28
    Platform
    XBOX1
    Quote Originally Posted by PrimalVigilante View Post
    Try raw and turn the gain down and the other up 60 to 70. I had the same on my tmx that cured it.
    Thanks, I also have a TMX and switching to Raw, Gain at 90 and everything else at 70 made everything much better.
    The following user likes this Post: PrimalVigilante


  7. #27
    Kart Driver
    Join Date
    May 2015
    Posts
    98
    Platform
    XBOX1
    I have a question on this. I have the tx. I did calibration. I turn to the left max and it says like 90, then I thought I was to rotate my wheel all the way around until lock to the right. When I do this the number on the right side of the screen where yours says 900, mine says 180. I have calibrated my wheel this way in AC,PC1, and PC2. I haven't had any issues with driving so I'm confused as if I am not calibrating the wheel right.

    so I literally just turn the wheel all the way to the left, hit next, and then rotate my wheel only 90 degrees? I get that 90 degrees is a quarter rotation, but how do I make sure I've rotated just 90 degrees and not say 85 or 100? Wouldn't this throw off the setting then? Should I rotate my wheel to the right until it hits 900?

    Sorry if this seems like a really inane question but I haven't felt like I've had any issues with FFB and I don't calibrate my wheel this way.

  8. #28
    Superkart Pilot
    Join Date
    May 2015
    Posts
    213
    Platform
    XBOX1
    Quote Originally Posted by Foolsjester View Post
    Raw
    100 - shouldn't adjust this
    49 - adjust this for weight of wheel
    22
    45
    I'm running this now with the volume (wheel weight adjustment) at 35 and it is SWEET!! Thanks!!
    The following user likes this Post: Foolsjester


  9. #29
    Superkart Pilot Juiced46's Avatar
    Join Date
    Mar 2017
    Location
    CT
    Posts
    730
    Platform
    XBOX1 X
    Quote Originally Posted by snipeme77 View Post
    So guys the TX series of wheels ARE working in Pcars 2?
    No issues with the TX for me at all. I have been tweaking settings constantly until I got the feel I wanted and working flawless.

    Quote Originally Posted by thevilleky View Post
    I have a question on this. I have the tx. I did calibration. I turn to the left max and it says like 90, then I thought I was to rotate my wheel all the way around until lock to the right. When I do this the number on the right side of the screen where yours says 900, mine says 180. I have calibrated my wheel this way in AC,PC1, and PC2. I haven't had any issues with driving so I'm confused as if I am not calibrating the wheel right.

    so I literally just turn the wheel all the way to the left, hit next, and then rotate my wheel only 90 degrees? I get that 90 degrees is a quarter rotation, but how do I make sure I've rotated just 90 degrees and not say 85 or 100? Wouldn't this throw off the setting then? Should I rotate my wheel to the right until it hits 900?

    Sorry if this seems like a really inane question but I haven't felt like I've had any issues with FFB and I don't calibrate my wheel this way.
    I usually rotate to the right. But anyhow this is how you do it.

    Rotate right, you will feel a bit of resistance around 90. Go harder right until you hit 100. Now its going to want you to go 90*. Re center, go 90* to the right, when you are @ 90* you should see 900 on the screen. You are now calibrated.
    The following user likes this Post: Maskmagog


  10. #30
    Rookie
    Join Date
    Sep 2017
    Location
    California
    Posts
    1
    Platform
    XBOX1
    Kinda off topic but I have the TX base, the 599XX EVO add on wheel and the T3PA pedal setup and when I go to configuration screen I can't program buttons to act as the RB/LB. This is limiting my ability to use KERS and Active aero so some cars. Other than that I'm not having any issues but I do plan on changing some of the settings to see if it makes the wheel feel better.

Similar Threads

  1. Thrustmaster VG T300RS settings pc
    By Honkey in forum PC - Technical Help & Support
    Replies: 2
    Last Post: 14-10-2016, 13:09
  2. best thrustmaster t100 settings
    By andyparks in forum PS4 - Technical Help & Support
    Replies: 9
    Last Post: 07-07-2015, 19:21
  3. Thrustmaster T3PA-PRO - SETTINGS
    By nitrojunk in forum Project CARS on Xbox One
    Replies: 5
    Last Post: 27-06-2015, 21:54
  4. Try this settings for Thrustmaster TX
    By cplzell in forum XB1 - Technical Help & Support
    Replies: 2
    Last Post: 18-05-2015, 05:09
  5. Thrustmaster TX settings help each
    By scgor in forum Project CARS on Xbox One
    Replies: 9
    Last Post: 13-05-2015, 23:15

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •