Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Pedal sensitivity issue

  1. #1
    Superkart Pilot
    Join Date
    Sep 2017
    Location
    Townsville
    Posts
    115
    Platform
    PC

    Pedal sensitivity issue

    Hi all, i am having a controller issue with my fanatec CSR elite pedals and controller settings within PCars 2.

    1. when calibrating the pedals, it does not register on screen until 36%, that is identical for clutch and brake.
    2. when on track ( in neutral or clutch depressed, engine rpm will reach maximum in what i reckon would be this 36% of pedal pressed ( this does not seem right)
    3. brake and clutch pedal also behave the same way ( although the clutch in reverse order. pretty much dead zone for first 70% depressed and then all clutch range in bottom 30% ( which i think leads me to my erratic missing gears in upshift ).
    4. i believe this is also what is causing my rear end lock ups on downshifts.

    I have tried throttle, brake and clutch sensitivity settings and dead zones, this does not alter a single thing. for example tried throttle dead zone 100 and sensitivity 0 ( which from what i understand should only give me a very sensitive throttle range compressed at pretty much throttle flat to the floor. no change whatsoever. likewise the Steering damper setting does not alter the weight of my wheel ( fanatec Porsche GT2 )

    ++NB this does not occur in any other sims and the fanatec control panel shows smooth full range as applied on pedals.

    if anyone could shed some light on this and possibly test it out too i would be most appreciative.

    thank you.,
    Phil

  2. #2
    WMD Member Morgan Henstridge's Avatar
    Join Date
    Oct 2011
    Location
    In The Redline
    Posts
    992
    Platform
    PC
    Are the pedals connected via USB or to a wheel base??
    PC - || Corsair 600C || 1080 TI Founders Edition || AMD Ryzen 7 1800x || 16GB DDR4 4000mhz || Asus Crosshair VI Hero || EKWB 360 + 240 RAD Custom Loop (CPU / GPU) || Corsair AX1200 || Logitech G910 Orion Spectruim || Logitech G700 || Fanatec CSW v2 BMW GT & Formula Rims || Fanatec CSS SQ v1.5 || Fanatec CSP V3 Brake Performance Kit || Fanatec Handbrake || Simvibe || Logitech 5.1 Speakers || 2x Yamaha HS80 || Oculus Rift CV1 ||AOC 34" Ultra-Wide IPS || Synology DS1817+ || Windows 10 Pro x64 ||

  3. #3
    Superkart Pilot
    Join Date
    Sep 2017
    Location
    Townsville
    Posts
    115
    Platform
    PC
    USB

  4. #4
    Moderator GTsimms's Avatar
    Join Date
    May 2015
    Location
    Louisiana
    Posts
    1,220
    Platform
    PC
    My suggestion would be making sure that you press all pedals before entering the game to see if this helps!
    Wheel Settings All of My Games (Slow WIP 8/2019)
    PC's used during WMD 2
    PC 1 Win 10 Home 64bit MSI 970 Gamer/FX-8350(4.2), 16GB Crucial, Sapphire R9 290 Tri-X OC (MSI AfterBurner 1100 and 1425)
    PC 2 Win 10 Home 64bit ASUS Prime X370-Pro/Ryzen 7 1700X 3.77 GHz, 32 GB Corsair Veng 3200 @ 2933,
    MSI GAMING X GTX 1070 (MSI AfterBurner 120/89/137/425)
    PC 3 Win 10 Home 64bit ASUS Prime Z270-A/i7 7700K 4.5 GHz, 32 GB GSKILL Trident White 3200, EVGA SC GTX 1070 (MSI AfterBurner 109/89/124/425) Oculus Rift CV1 (VR Cover for eyewear)

    Monitor LG 29" Ultrawide 2560x1080
    Steam, Origin, Uplay, and Epic (GTsimms)

  5. #5
    Kart Driver
    Join Date
    May 2015
    Posts
    18
    I have a T500 wheel and I use a brake mod (original one that came with it). Using the brake mod, I can only press like 30% of the brake pedal range.
    In game, the brake pedal was not recognized at all (that also happened with PC1).

    What I did was, I took out the brake mod. Once I did that, I entered the game, fully press the pedal (100% range) and it recognized it.
    I closed the game.
    Re installed the brake mod and then re opened the game and when I went to calibrate the brake pedal again, boom, it recognized the 30% pedal range and I didn't have any other issues with it.
    Possibly this could help you.

  6. #6
    Moderator +WMD 1/2 Member Roger Prynne's Avatar
    Join Date
    Oct 2011
    Location
    Newquay, Cornwall, UK
    Posts
    7,691
    Platform
    PC
    2. when on track ( in neutral or clutch depressed, engine rpm will reach maximum in what i reckon would be this 36% of pedal pressed ( this does not seem right)
    Yep this is correct, just like in real life.
    Mobo: GIGABYTE GA-970A-DS3P AMD 970 ATX | CPU: AMD FX-8350 4.0 GHz (4.20 GHz Turbo) 8x Core | CPU Cooler: Cooler Master V8 | Memory: 16GB DDR3 (1600MHz)
    Graphics: NVIDIA GeForce GTX 970 2GB GDDR5 - (Driver: 385.69)| Displays: 55" LG 4K UHD TV @ 60Hz - 24" Monitor 1920x1080 @ 60Hz | PSU: Sea Sonic X - 850 Watt
    Storage: SSD 250GB Samsung 850 EVO x2 - 2TB Western Digital Caviar Green Sata III x2 | Sound: X-FI Xtreme Gamer Fatality Pro + 400W Technics 7.1
    Wheel: G25 & Pedals with Nixim mod springs (NO PROFILER USED) | RIG: Playseat Challenge | OS: Windows 10 Pro 64 bit
    -----------------------------------------------------------------------------------------------------------------------------------------
    A few helpful links for you


    The following 2 users likes this Post: GTsimms, Sankyo


  7. #7
    WMD Member Mad Al's Avatar
    Join Date
    Nov 2011
    Location
    Suffolk, England
    Posts
    3,306
    You shouldn't really need to calibrate the pedals (although saying that I had to do mine the other day as they are dying.. ), just make sure to press them down before entering the game

    Steering damper.. do you mean controller damping in the configuration menu, if so, that's gamepad only... you want more wheel weight (if by weight you mean more pushback from the wheel), you need to up the volume in the Force feedback menu. If you really do want more dampening, change DPR on the wheel

    Ryzen R7 3800X - Gigabyte X570 Aorus Elite - 16Gig DDR4 (Ballistix Elite 3600) - ZOTAC GTX1080Ti FE with EVGA Hybrid Cooler - iiiyama ProLite B2783QSU - Oculus Rift CV1 - Samsung 860 250G SSD, WD 6T Black, WD 2T Black, OCZ 120G Vertex 2 SSD, LiteOn iHAS122 DVD-RW - Creative 5.1 speaker system - Logitech G19 - Gigabyte GM-M6880X Gaming Mouse - Fanatec GT3 RS V2 + CSP V3 + SSH Shifter - Windows 10 Pro (64 bit).

    Second machine used for additional testing. i7-4790T - Asus H97-Plus - 16G DDR3 PC-12800 - EVGA RTX2060 - iiyama Prolite E2607WS - Oculus Rift CV1 - W10 Pro (64 bit) - xbox360 pad or Logitech DFP (all at stock speeds)

    HTPC - For testing of Steam Big Picture Mode (Hopefully from Media Portal 2) - i5-4590S - ASUS H81M-C - 8G DDR3 PC-10666 - Gigabyte GTX1050Ti - Windows 10 Home (64 bit) - xbox360 pad

    YouTube channel - My attempt at a PC2 Career - a work in progress! - Trying other other racing content

  8. #8
    Superkart Pilot
    Join Date
    Sep 2017
    Location
    Townsville
    Posts
    115
    Platform
    PC
    Quote Originally Posted by Roger Prynne View Post
    Yep this is correct, just like in real life.
    In real life my car nor any other cars I have owned revs it's ring off at quarter pedal press when parked or in neutral. Does yours?

  9. #9
    Superkart Pilot
    Join Date
    Sep 2017
    Location
    Townsville
    Posts
    115
    Platform
    PC
    Quote Originally Posted by GTsimms View Post
    My suggestion would be making sure that you press all pedals before entering the game to see if this helps!
    No change as I have checked in fanatic control panel and also in AC

  10. #10
    WMD Member Mahjik's Avatar
    Join Date
    Oct 2011
    Location
    Kansas City, MO
    Posts
    8,232
    Platform
    PC
    Quote Originally Posted by Oomph View Post
    In real life my car nor any other cars I have owned revs it's ring off at quarter pedal press when parked or in neutral. Does yours?
    Most (modern) cars have a rpm cutoff without any load on the engine by default.
    Intel i7-4790K @4.4GHz | 16gb ram | ZOTAC GeForce GTX 1080 | 5040x1050 | Windows 8.1 64-bit | Thrustmaster TX Servo Base | Thrustmaster TH8A Shifter
    ProtoSimTech PT-1 Pedals | rSeat Evo V2 | Front/Rear Transducers | SimVibe | Black Max II Button Controller | Sennheiser PC 360 Headset


    Forum Rules
    PC2 FAQ & Tips

Similar Threads

  1. T3PA PRO PEDAL SET brake pedal issue
    By BreadedVirus in forum Off Topic Discussion
    Replies: 1
    Last Post: 31-08-2017, 20:13
  2. Thrustmaster T500 RS T3PA Pro pedal accelerator pedal issue
    By rambomonkey in forum PC - Technical Help & Support
    Replies: 5
    Last Post: 28-02-2016, 21:11
  3. speed sensitivity and controller filtering sensitivity? Please explain?
    By CreasingCurve1 in forum Project CARS on Xbox One
    Replies: 1
    Last Post: 20-10-2015, 02:51
  4. Accelerator pedal sensitivity T100
    By Sweet19blue in forum Project CARS on Playstation 4
    Replies: 2
    Last Post: 26-05-2015, 10:13
  5. Throttle sensitivity and another minor issue
    By Tlloyderz in forum General Discussion
    Replies: 6
    Last Post: 13-05-2015, 17:32

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •