Results 1 to 3 of 3

Thread: Field of View

  1. #1
    Superkart Pilot RookieRaceline's Avatar
    Join Date
    Jan 2017

    Question Field of View

    I read a guide about Field of View (FoV) and experimented a little bit with mine to see if it really does make a difference. It does!
    I am currently trying to figure out what the right FoV should be for my combination of screen and position, but what i am struggling with, is the speed sensitivity.

    If i set this to off, then all is great, but i'd like to have it turned off, because it makes sense to change this depending on speed.

    When i turn speed sensitivity on for the FoV, it puts the camera right through the front screen, so that I can only see the wipers. This happens despite me setting the minimum FoV of the speed sensitivity to the same as my normal FoV (that works well when speed sensitivity is off).

    It is as if when i turn the speed sensitivity on, it makes the angle 10-20 digrees narrower even though it is set to the same as it set on the cockpit view.

    Any ideas or feedback on what i may be doing wrong here?
    (this is on Xbox btw. Alsoi have checked that it is the correct camera view, as i did notice, that it will just to the default chosen camera once adjusted)
    RookieRaceline | AllVirtualRacing
    Xbox Gamertag: Firben

  2. #2
    Kart Driver
    Join Date
    Dec 2017
    XBOX1 X
    Min and Max on the speed sensitivity fov are percentages. Set minimum to 100 to have the same as your normal fov.

  3. #3
    Kart Driver mulch's Avatar
    Join Date
    Dec 2017
    LA (Lower Alabama)
    The min/max sensitivity settings are the FOV min/max that will be displayed and the 2 speed settings set the min FOV = min speed / max FOV = max speed
    The min is used at your slowest speed before or at corner entry and the max at your top speed - your preference. The difference in min/max speed - and the difference in min/max FOV together control how much and how quickly the FOV changes

    what I ended up liking was
    set the min speed sensitivity = cockpit/helmet FOV (your was not, causing the change in view) and the max +15
    match the min sensitive speed to slowest corner or avg slowest speed for that circuit and set the max about 40-50 mph higher on avg . With super fast cars and long straights I may set the max a bit higher or equal to top speed.

    I think you could set the min FOV to be lower than your helmet/cockpit FOV and make it work but i don't see the point in that really..

Similar Threads

  1. Field of view
    By muttlie99 in forum Technical Help & Support (PC)
    Replies: 6
    Last Post: 01-01-2018, 04:34
  2. Field of View Settings
    By STaLLiOnO in forum Project CARS 2 on XBOX One
    Replies: 2
    Last Post: 15-12-2017, 02:00
  3. Field Of View on CONSOLE
    By Fre.Mo in forum Project CARS on Playstation 4
    Replies: 84
    Last Post: 03-12-2015, 13:10
  4. Field of View Help Please?
    By redline2400 in forum General Discussion
    Replies: 2
    Last Post: 11-06-2015, 18:38

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts