Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: PC2 - Fanatec CSW2 - Drivehub ?

  1. #11
    Kart Driver TakMan's Avatar
    Join Date
    May 2015
    Location
    Midlands
    Posts
    27
    Platform
    PS4
    Drivehub arrived today. I've updated it's firmware via my MacBook Pro. It's in 'Race Mode' (displaying the running 8 figure). For the life of me I can't work out how to get it though into it's 'Fanatec' mode.... The DH instructions tell me I need to press 'Share + Option' to do so, but I can't find this button sequence on my Universal Hub - https://www.fanatec.com/us-en/suppor...product_id;783

    Been a long day, so will look again tomorrow, but if anyone knows, please drop me a note on here!
    CSW-V2 | Universal Hub PC/PS4 | GT Rim | CSP-V3 + 2x dampers | CSS SQ V 1.5
    Wheel: SEN: AUT | FF: 80 | SHo: 100 | ABS: OFF | Lin: OFF | Dea: OFF | Dri: OFF | For: 100 | Spr: 100 | Dpr: 100 | Brf 30
    Game: Deadzones: 0 | Sensitivities: 50 | FFB/TF: 100/100 | Advanced Controller - OFF
    48" Samsung LED TV | AKG K550 | GameRacer Pro with Tillet kart seat

  2. #12
    WMD Member RomKnight's Avatar
    Join Date
    Oct 2011
    Location
    Lisbon
    Posts
    2,566
    Platform
    PC
    What do you mean fanatec mode?

    its only ps3 and pc mode AFAIK.

    just press select and circle at the top of the hub after the calibration of the wheel (after power on).

    This according to the manual (been a while since I use mine with the gt wheel)
    ---
    My feedback is always on default setup unless stated otherwise. Auto-Clutch is OFF
    Still hoping for Estoril one day

    | CPU: i5 8600K@5GHz | GPU: MSI GTX1080 Gaming X 8GB (397.31) (OC: +70/+450) | Mobo: Asus Prime Z370-p
    | RAM: 2x8GB DDR4 GoodRam Iridium 2400Mhz | PSU: Corsair TX850M | OS: Win10 x64 | Sound: Onboard Realtek ACL887 | C:\>: Samsung 840 EVO 250GB
    [B]| Monitor:[/B] 3x IPS LG23EA63 @5760x1080 (Bezel Corrected) -- HTC VIVE

    | Wheel: CSWv2 + CSPv3(usb) + CSS SQv1.5 - (driver v310 - fw 455) | Damping: 100 | 900º
    | In game: Deadzones: 0 |Sensitivity: 50 | Damping: 0
    | Wheel Profile: Sens: Aut | FF: 100 | SHo: 100 | ABS: 0 | Dri: OFF | For: 100 | Spr: 100 | Dpr: 100

    | FFB: RAW|Gain: 100 | Volume: 50 | Tone: 50 | FX: 50 [B]

    | Visual FX: Default except Interion Flare: Off
    | Performance - Aniso: 16x | MSAA: Medium | Vsync: Off | Grass: Low | Envmap/Reflections/Shadows: Low/medium/low | Car/Track: High | Blur: Off
    | E. Mirrors: Yes | Particles: High/High | SS: 1.2 | Sharpening Strength/Clamp: 0.6/0.045
    | Driving assists: ABS/TC, maybe - SC always OFF
    | CmdLine: -ffb600 -skipcrowds

  3. #13
    Superkart Pilot Juiced46's Avatar
    Join Date
    Mar 2017
    Location
    CT
    Posts
    937
    Platform
    XBOX1 X
    Quote Originally Posted by RomKnight View Post
    What do you mean fanatec mode?

    its only ps3 and pc mode AFAIK.

    just press select and circle at the top of the hub after the calibration of the wheel (after power on).

    This according to the manual (been a while since I use mine with the gt wheel)
    There are 2 modes on the drivehub. Fanalogic or Fanatec mode.

    Takman, you need to hold the buttons for about 10 secs and you will see it switch on the rim
    Epson 4K Projector/100" Elite Screen/Xbox One X/Fanatec V2.5/CSL Elite Pedals w/LC/Trak-Racer RS8 Rig/
    *****For Sale Thrustmaster TX458 Italia wheel w/Pedals cheap. PM me for info*****

  4. #14
    Kart Driver TakMan's Avatar
    Join Date
    May 2015
    Location
    Midlands
    Posts
    27
    Platform
    PS4
    OK, perhaps I’m being thick.... if so, I apologise....
    My understanding was that the Fanalogic/Fanatec modes were switched via buttons on the actual wheel. If that’s the case and reading from the DH instructions, I need to press the equivalent wheel buttons that correspond to ‘options + share’ on a standard PS4 game pad... I just don’t know what they are on my old Universal Hub...?

    A screen grab of said instructions:
    Attached Thumbnails Attached Thumbnails D580007D-F3BF-4797-97BC-5C535AE2A9D9.jpg  

    EF87FACD-9573-4653-9427-6BFDBEC3D29F.jpg  

    CSW-V2 | Universal Hub PC/PS4 | GT Rim | CSP-V3 + 2x dampers | CSS SQ V 1.5
    Wheel: SEN: AUT | FF: 80 | SHo: 100 | ABS: OFF | Lin: OFF | Dea: OFF | Dri: OFF | For: 100 | Spr: 100 | Dpr: 100 | Brf 30
    Game: Deadzones: 0 | Sensitivities: 50 | FFB/TF: 100/100 | Advanced Controller - OFF
    48" Samsung LED TV | AKG K550 | GameRacer Pro with Tillet kart seat

  5. #15
    Superkart Pilot Juiced46's Avatar
    Join Date
    Mar 2017
    Location
    CT
    Posts
    937
    Platform
    XBOX1 X
    Quote Originally Posted by TakMan View Post
    OK, perhaps I’m being thick.... if so, I apologise....
    My understanding was that the Fanalogic/Fanatec modes were switched via buttons on the actual wheel. If that’s the case and reading from the DH instructions, I need to press the equivalent wheel buttons that correspond to ‘options + share’ on a standard PS4 game pad... I just don’t know what they are on my old Universal Hub...?

    A screen grab of said instructions:
    You need to long press the corresponding buttons on the wheel itself. Not the gamepad. Its the buttons in the manual for the Xbox one. The 2 squares and the 3 lines. Base needs to be in PC mode.
    Last edited by Juiced46; 02-02-2019 at 12:16.
    Epson 4K Projector/100" Elite Screen/Xbox One X/Fanatec V2.5/CSL Elite Pedals w/LC/Trak-Racer RS8 Rig/
    *****For Sale Thrustmaster TX458 Italia wheel w/Pedals cheap. PM me for info*****

  6. #16
    WMD Member RomKnight's Avatar
    Join Date
    Oct 2011
    Location
    Lisbon
    Posts
    2,566
    Platform
    PC
    OK, been quite a while since I used my hub. Need to check that out.

    Always learning something new
    ---
    My feedback is always on default setup unless stated otherwise. Auto-Clutch is OFF
    Still hoping for Estoril one day

    | CPU: i5 8600K@5GHz | GPU: MSI GTX1080 Gaming X 8GB (397.31) (OC: +70/+450) | Mobo: Asus Prime Z370-p
    | RAM: 2x8GB DDR4 GoodRam Iridium 2400Mhz | PSU: Corsair TX850M | OS: Win10 x64 | Sound: Onboard Realtek ACL887 | C:\>: Samsung 840 EVO 250GB
    [B]| Monitor:[/B] 3x IPS LG23EA63 @5760x1080 (Bezel Corrected) -- HTC VIVE

    | Wheel: CSWv2 + CSPv3(usb) + CSS SQv1.5 - (driver v310 - fw 455) | Damping: 100 | 900º
    | In game: Deadzones: 0 |Sensitivity: 50 | Damping: 0
    | Wheel Profile: Sens: Aut | FF: 100 | SHo: 100 | ABS: 0 | Dri: OFF | For: 100 | Spr: 100 | Dpr: 100

    | FFB: RAW|Gain: 100 | Volume: 50 | Tone: 50 | FX: 50 [B]

    | Visual FX: Default except Interion Flare: Off
    | Performance - Aniso: 16x | MSAA: Medium | Vsync: Off | Grass: Low | Envmap/Reflections/Shadows: Low/medium/low | Car/Track: High | Blur: Off
    | E. Mirrors: Yes | Particles: High/High | SS: 1.2 | Sharpening Strength/Clamp: 0.6/0.045
    | Driving assists: ABS/TC, maybe - SC always OFF
    | CmdLine: -ffb600 -skipcrowds

  7. #17
    Kart Driver TakMan's Avatar
    Join Date
    May 2015
    Location
    Midlands
    Posts
    27
    Platform
    PS4
    Thanks for the replies... so I’m on the right track if you pardon the pun, I just need to work out what buttons on my Universal Hub correspond with ‘share + options’ per the PS4 controller, as I don’t appear to have them... I’ve emailed the supplier to ask for their help on this matter.
    CSW-V2 | Universal Hub PC/PS4 | GT Rim | CSP-V3 + 2x dampers | CSS SQ V 1.5
    Wheel: SEN: AUT | FF: 80 | SHo: 100 | ABS: OFF | Lin: OFF | Dea: OFF | Dri: OFF | For: 100 | Spr: 100 | Dpr: 100 | Brf 30
    Game: Deadzones: 0 | Sensitivities: 50 | FFB/TF: 100/100 | Advanced Controller - OFF
    48" Samsung LED TV | AKG K550 | GameRacer Pro with Tillet kart seat

  8. #18
    Superkart Pilot Juiced46's Avatar
    Join Date
    Mar 2017
    Location
    CT
    Posts
    937
    Platform
    XBOX1 X
    Quote Originally Posted by TakMan View Post
    Thanks for the replies... so I’m on the right track if you pardon the pun, I just need to work out what buttons on my Universal Hub correspond with ‘share + options’ per the PS4 controller, as I don’t appear to have them... I’ve emailed the supplier to ask for their help on this matter.
    It is the buttons circled in the picture below.

    Click image for larger version. 

Name:	universalhub.jpg 
Views:	17 
Size:	109.6 KB 
ID:	264406
    Epson 4K Projector/100" Elite Screen/Xbox One X/Fanatec V2.5/CSL Elite Pedals w/LC/Trak-Racer RS8 Rig/
    *****For Sale Thrustmaster TX458 Italia wheel w/Pedals cheap. PM me for info*****

  9. #19
    Superkart Pilot Juiced46's Avatar
    Join Date
    Mar 2017
    Location
    CT
    Posts
    937
    Platform
    XBOX1 X
    Quote Originally Posted by RomKnight View Post
    OK, been quite a while since I used my hub. Need to check that out.

    Always learning something new
    Just an FYI, try both modes as they both give a different feeling based on what game/console you are playing it on.

    For Example. I have a V2.5 with a P1 CSL Elite wheel that I use on Xbox and PC. I use the Drivehub top play GTsport on PS4. I use the Drivehub in FanaLogic mode. It feels better than Fanatec mode. However, if you read RS60s post on page 1 of this thread, it works better in Fanatec mode for PCars2. So just try both.
    Epson 4K Projector/100" Elite Screen/Xbox One X/Fanatec V2.5/CSL Elite Pedals w/LC/Trak-Racer RS8 Rig/
    *****For Sale Thrustmaster TX458 Italia wheel w/Pedals cheap. PM me for info*****

  10. #20
    WMD Member RomKnight's Avatar
    Join Date
    Oct 2011
    Location
    Lisbon
    Posts
    2,566
    Platform
    PC
    diferent HUB. Mine is the 1st one or the one for ps3/pc

    I looked at the manual and no such thing for me. At least I have not found anything about it and the image above is different from mine
    ---
    My feedback is always on default setup unless stated otherwise. Auto-Clutch is OFF
    Still hoping for Estoril one day

    | CPU: i5 8600K@5GHz | GPU: MSI GTX1080 Gaming X 8GB (397.31) (OC: +70/+450) | Mobo: Asus Prime Z370-p
    | RAM: 2x8GB DDR4 GoodRam Iridium 2400Mhz | PSU: Corsair TX850M | OS: Win10 x64 | Sound: Onboard Realtek ACL887 | C:\>: Samsung 840 EVO 250GB
    [B]| Monitor:[/B] 3x IPS LG23EA63 @5760x1080 (Bezel Corrected) -- HTC VIVE

    | Wheel: CSWv2 + CSPv3(usb) + CSS SQv1.5 - (driver v310 - fw 455) | Damping: 100 | 900º
    | In game: Deadzones: 0 |Sensitivity: 50 | Damping: 0
    | Wheel Profile: Sens: Aut | FF: 100 | SHo: 100 | ABS: 0 | Dri: OFF | For: 100 | Spr: 100 | Dpr: 100

    | FFB: RAW|Gain: 100 | Volume: 50 | Tone: 50 | FX: 50 [B]

    | Visual FX: Default except Interion Flare: Off
    | Performance - Aniso: 16x | MSAA: Medium | Vsync: Off | Grass: Low | Envmap/Reflections/Shadows: Low/medium/low | Car/Track: High | Blur: Off
    | E. Mirrors: Yes | Particles: High/High | SS: 1.2 | Sharpening Strength/Clamp: 0.6/0.045
    | Driving assists: ABS/TC, maybe - SC always OFF
    | CmdLine: -ffb600 -skipcrowds

Similar Threads

  1. Patch 4.0 - Fanatec CSW2.5 on XBOX - FFB a mess - settings?
    By l Rilla l in forum Technical Help & Support (XBOX1)
    Replies: 11
    Last Post: 08-03-2018, 19:23
  2. DriveHub on Project Cars 2
    By odemode in forum Project CARS 2 on XBOX One
    Replies: 9
    Last Post: 13-12-2017, 17:05
  3. CSW2 USB disconnects?
    By LibranRabbit in forum Technical Help & Support (PC)
    Replies: 6
    Last Post: 26-10-2017, 12:30
  4. DriveHub - Does it work?
    By Zeke Bewlay in forum Technical Help & Support (PS4)
    Replies: 24
    Last Post: 16-10-2017, 19:04
  5. Fanatec csw v2 with drivehub faulty recognition
    By CPS-3 in forum Project CARS 2 on Playstation 4
    Replies: 3
    Last Post: 23-09-2017, 23:40

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •