Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: "Wheel Rumble" over curbs

  1. #1
    Superkart Pilot freeon's Avatar
    Join Date
    Jun 2015
    Posts
    251
    Platform
    PC

    "Wheel Rumble" over curbs

    I have T300RS that i have been using with PC2 since launch. I thought everything was OK until last night. I decided to try raceroom and I noticed the wheel "rumbles or shakes" when going over curbs. As it should. I never experienced this in PC2. Does PC2 not support it or is it a settings issue. I have tried most of Jack Spade custom FFB files and never seen this. If this should work in PC2 I would appreciate any help in getting it to work with my setup.
    I7-7700K/GTX 1080/Corsair Vengeance 2x 8GB DDR4 DRAM/Gigabyte LGA1151 Crossfire DDR4 Motherboard/ADATA Premium Pro 256 GB SATA SSHD/Deep Cool TX Mid Tower Tesseract/
    IVRY PSVR

  2. #2
    WMD Member Mad Al's Avatar
    Join Date
    Nov 2011
    Location
    Suffolk, England
    Posts
    3,419
    Quote Originally Posted by freeon View Post
    I have T300RS that i have been using with PC2 since launch. I thought everything was OK until last night. I decided to try raceroom and I noticed the wheel "rumbles or shakes" when going over curbs. As it should. I never experienced this in PC2. Does PC2 not support it or is it a settings issue. I have tried most of Jack Spade custom FFB files and never seen this. If this should work in PC2 I would appreciate any help in getting it to work with my setup.
    Only if the kerb is actually a kerb, not just painted tarmac. If you have Race Room set up with a load of fake effects for kerb rumble, try turning them off, it will still shake over a proper serrated kerb

    Ryzen R7 3800X - Gigabyte X570 Aorus Elite - 16Gig DDR4 (Ballistix Elite 3600) - ZOTAC GTX1080Ti FE with EVGA Hybrid Cooler - iiiyama ProLite B2783QSU - Oculus Rift CV1 - Samsung 860 250G SSD, WD 6T Black, WD 2T Black, OCZ 120G Vertex 2 SSD, LiteOn iHAS122 DVD-RW - Creative 5.1 speaker system - Logitech G19 - Gigabyte GM-M6880X Gaming Mouse - Fanatec GT3 RS V2 + CSP V3 + SSH Shifter - Windows 10 Pro (64 bit).

    Second machine used for additional testing. Ryzen R5 3600X - Asus Prime X570-P - 16G DDR4 (Crucial Ballistix 3200) - EVGA RTX2060 - iiyama Prolite E2607WS - Oculus Rift CV1 - W10 Pro (64 bit) - xbox360 pad or Logitech DFP (all at stock speeds)

    HTPC - For testing of Steam Big Picture Mode (Hopefully from Media Portal 2) - i5-4590S - ASUS H81M-C - 8G DDR3 PC-10666 - Gigabyte GTX1050Ti - Windows 10 Home (64 bit) - xbox360 pad

    YouTube channel - My attempt at a PC2 Career - a work in progress! - Trying other other racing content
    The following user likes this Post: hkraft300


  3. #3
    Superkart Pilot freeon's Avatar
    Join Date
    Jun 2015
    Posts
    251
    Platform
    PC
    Thanks for the reply but it's not actually answering my question. Should this work in PC2? I don't plan on spending much time in Race Room so not concerned for those setting. Only PC2
    I7-7700K/GTX 1080/Corsair Vengeance 2x 8GB DDR4 DRAM/Gigabyte LGA1151 Crossfire DDR4 Motherboard/ADATA Premium Pro 256 GB SATA SSHD/Deep Cool TX Mid Tower Tesseract/
    IVRY PSVR

  4. #4
    GT5 Pilot Zaskarspants's Avatar
    Join Date
    Oct 2017
    Location
    Bristol
    Posts
    1,983
    Platform
    XBOX1 X
    I do get kerb vibes but the intensity and presence or not is dependant on car, track, suspension state, wheel clipping and ffb settings. I run FX 0 but increasing this a bit will increase kerb vibes I reckon.
    Xboxx, 58 inch TV, real fov 80, Sim Labs GT1 evo rig, Fanatec csw2.5, Shifter, v3 pedals, Mclaren Gt3 rim, Sparco Grid q seat.
    Join stoopid time trial challenges for satisfaction https://www.stoopidchallenges.com

  5. #5
    Superkart Pilot
    Join Date
    Dec 2018
    Posts
    152
    Platform
    PC
    I use Immersive after a period running jack spades as immersive adjusts itself over a couple of laps to avoid clipping. In this way i can ramp up fx value and as a result i get a pronounced kerb effect.
    G920 on pc

  6. #6
    GT5 Pilot Cholton82's Avatar
    Join Date
    May 2015
    Posts
    1,125
    Platform
    XBOX1 X
    I donít think I get them but I use Raw with my T300 , I do get a rumble under my arse though through the bass shaker over some kerbs .

    Edit to say yeah I feel them depending on kerb style
    Last edited by Cholton82; 18-05-2019 at 07:10.

  7. #7
    Superkart Pilot Twinz's Avatar
    Join Date
    Dec 2017
    Location
    SW Florida
    Posts
    637
    Platform
    PC
    My Fanatec rumbles on some curbs/tracks.
    Steam name: z1nonly Twitch: https://www.twitch.tv/z1nonly172 YouTube: https://www.youtube.com/user/Z1NONLY/featured
    Windows 10 / 3800X / GTX 1080 ti / 16gb DDR4 @3800 / HP Reverb Pro / GTA-F racing simulator / Fanatec CSL Elite-P1 / CS V3 pedals / CS Shifter SQ V 1.5

  8. #8
    WMD Member Mad Al's Avatar
    Join Date
    Nov 2011
    Location
    Suffolk, England
    Posts
    3,419
    Quote Originally Posted by freeon View Post
    Thanks for the reply but it's not actually answering my question. Should this work in PC2? I don't plan on spending much time in Race Room so not concerned for those setting. Only PC2
    Of course it works, but you have to understand that it only works for properly serrated kerbs, because it's derived from the suspension, not from some fake effect driven by going over a kerb material. Just make sure you are not masking all the effects by running too much gain and volume and if you want to feel more effects use immersive. That's precisely why I asked about what effects you have set in Race room, if you are feeling some exaggerated effect, it's not "As it should", it's wrong.

    Ryzen R7 3800X - Gigabyte X570 Aorus Elite - 16Gig DDR4 (Ballistix Elite 3600) - ZOTAC GTX1080Ti FE with EVGA Hybrid Cooler - iiiyama ProLite B2783QSU - Oculus Rift CV1 - Samsung 860 250G SSD, WD 6T Black, WD 2T Black, OCZ 120G Vertex 2 SSD, LiteOn iHAS122 DVD-RW - Creative 5.1 speaker system - Logitech G19 - Gigabyte GM-M6880X Gaming Mouse - Fanatec GT3 RS V2 + CSP V3 + SSH Shifter - Windows 10 Pro (64 bit).

    Second machine used for additional testing. Ryzen R5 3600X - Asus Prime X570-P - 16G DDR4 (Crucial Ballistix 3200) - EVGA RTX2060 - iiyama Prolite E2607WS - Oculus Rift CV1 - W10 Pro (64 bit) - xbox360 pad or Logitech DFP (all at stock speeds)

    HTPC - For testing of Steam Big Picture Mode (Hopefully from Media Portal 2) - i5-4590S - ASUS H81M-C - 8G DDR3 PC-10666 - Gigabyte GTX1050Ti - Windows 10 Home (64 bit) - xbox360 pad

    YouTube channel - My attempt at a PC2 Career - a work in progress! - Trying other other racing content

  9. #9
    Superkart Pilot Sentry87's Avatar
    Join Date
    Sep 2017
    Posts
    297
    Platform
    PC
    I get although faint and subtle with g29 on raw

  10. #10
    Superkart Pilot freeon's Avatar
    Join Date
    Jun 2015
    Posts
    251
    Platform
    PC
    Quote Originally Posted by Mad Al View Post
    Of course it works, but you have to understand that it only works for properly serrated kerbs, because it's derived from the suspension, not from some fake effect driven by going over a kerb material. Just make sure you are not masking all the effects by running too much gain and volume and if you want to feel more effects use immersive. That's precisely why I asked about what effects you have set in Race room, if you are feeling some exaggerated effect, it's not "As it should", it's wrong.
    Ah ok. Not sure what I have in race room, whatever was default. I understand that is should only work serrated curb. Just never felt it in PC2 in the last year and a half. So figured it might not even be a thing. Now that I know it should I will have to play with setting. Any recommendation for track or specific corner for testing.
    I7-7700K/GTX 1080/Corsair Vengeance 2x 8GB DDR4 DRAM/Gigabyte LGA1151 Crossfire DDR4 Motherboard/ADATA Premium Pro 256 GB SATA SSHD/Deep Cool TX Mid Tower Tesseract/
    IVRY PSVR

Similar Threads

  1. Replies: 0
    Last Post: 16-10-2017, 07:32
  2. "Force feedback" ideal for the steering wheel: "ECCI 7000", thank you
    By gecervi in forum Technical Help & Support (PC)
    Replies: 1
    Last Post: 27-09-2017, 00:46
  3. You can't spell "Wheel" without "Wheeeeeeeeeeeeeeeee!"
    By ao1977 in forum Project CARS on Xbox One
    Replies: 13
    Last Post: 12-05-2016, 22:13
  4. Replies: 51
    Last Post: 04-11-2015, 09:00
  5. Replies: 27
    Last Post: 14-09-2015, 18:52

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •