Page 1 of 259 1231151101 ... LastLast
Results 1 to 10 of 2589

Thread: [PS4] Fanatec hardware discussion thread

  1. #1
    WMD Member
    Join Date
    Nov 2011
    Posts
    5

    [PS4] Fanatec hardware discussion thread

    On the GTPlanet forums there is a lot of chat and complaining about the support with the Fanatec wheels, for example, i reads my GT3 RS V2 as the Turbo wheel, also i have a massive deadzone, there are more problems and i will send some of the people to explain theyr problems here. I hope you can resolve the problems really quickly because this is not what i hoped for.

    GrimeyDog's latest FFB Tweakers
    The following 7 users likes this Post: Boss_335, GrimeyDog, its_Tricky83, Mascot, tombay, turbobeat, VBR


  2. #2
    Rookie
    Join Date
    May 2015
    Posts
    4
    Things I've noticed on the Fanatec GT2 wheel and CS Elite pedals on PS4

    - GT2 wheel being recognised as the Turbo wheel
    - Run in PC mode is the only way to use the wheel, but then you don't get the playstation buttons light up on the wheel so thats quite annoying bashing your way around
    - If run in PS3 mode, the game freezes / lags until you turn off the wheel
    - MASSIVE dead zone around the steering centre and I can't seem to calibrate in game like on PC(?). I put it in 'Drift 1' on the steering wheel settings and its better, but far from ideal..
    - Force feedback seems just a tad NQR right now. Not enough of it and almost impossible to correct oversteer etc...
    - I've been using the paddles instead of the clutch but i hear others reporting a clutch problem.

    Desperately needs a fix as the game is somewhere between 'frustrating' and 'unplayable' in present state.

    I should note, the graphics etc I'm enjoying! Its just being let down with the wheel compatibility at the moment….
    Last edited by tommozza; 07-05-2015 at 23:20.
    The following 4 users likes this Post: Boss_335, Mascot, mr3uz, turbobeat


  3. #3
    WMD Member WadeOhh's Avatar
    Join Date
    Sep 2012
    Location
    Newcastle, Australia
    Posts
    48
    Platform
    PC
    Thanks for setting up this thread

    Here are a list of the issues I've found so far. PS4 with a Fanatec CSR wheel w/CSR Elite pedals. Boy do I have some issues. I've been noting them down on a piece of paper as I play.

    • Game will not recognise the clutch pedal.

    • Unless you assign a button to the clutch, when you go out on track, the clutch will be engaged (even with auto clutch turned on) so you go nowhere and the engine just revs with no drive (could be solved with fixing the above issue, getting the game to recognise the clutch pedal).

    • If I calibrate the pedals, I loose L2 and R2 functionality in menus, which is kind of crucial for navigating around.

    • (Not sure if this one is wheel specific) - Some of the sliders behave very weird. Some go up in increments of 1, some in 5, and some in 10. Steering config goes up in increments of 5, which is really annoying (who wants a deadzone of either 0 or 5). The difficulty slider only goes up in increments of 10! Whats the point of having difficulty between 0 - 100? Just make it 0 - 10 if its going to be like that?
      Edit: I got a little fed up with the PS4 version and also bought the PC version (even though my PC doesn't run it very well). Using a mouse to adjust the sliders is completely consistent and eliminates all these weird slider issues that you get in the PS4 version. I'm guessing these slider increment issues are caused by using a directional button as opposed to a mouse.

    • Once in a session, how do you scroll the leaderboard with a wheel (on a controller, it seems to be the right thumbstick).
      Very low priority.

    • Below about 10km/h, or when stationary, the FFB in the wheel seems to invert. If you turn it slightly from center, it will CRANK to one side with a tonne of force (when this happened, I wasn't expecting it and it took my thumb with it. I seriously thought I'd broken my thumb. It went with such force). When you pull the wheel back to center and past center in the other direction, it will crank full lock to that direction too. Like I said, its like the FFB becomes inverted (it should be noted I have 0 deadzone).
      Edit: Doesn't seem to be an issue on the PC version so I'm guessing this is some sort of PS4 bug.

    • Not a bug, but a big nice to have... On PS4, with a wheel, obviously you are limited somewhat on buttons real estate, so please, can we not make it required to have the 'handbrake' and the 'look back' buttons bound to buttons? I (and I'm sure most) NEVER use the handbrake, and for the look back button, we have mirrors. Make these buttons optional. I would love to be able to free these 2 buttons up for other things.

    Still finding things as I play, but these are the ones I've found so far. Will update if and when I find more.
    Last edited by WadeOhh; 12-05-2015 at 05:33. Reason: Updated difference I found between PC and PS4 versions.
    My Project CARS 2 setup
    PC | Thrustmaster T300RS GT Edition
    The following 4 users likes this Post: Boss_335, Skirner, SPESH4LI2ED


  4. #4
    Rookie
    Join Date
    May 2015
    Posts
    1

    Youtube video of day one issues with Fanatec Wheels

    Here's a link to the exact issue which a lot of people are experiencing.
    https://youtu.be/TqM3BcREKOo


    Cheers,
    Tricky83
    The following user likes this Post: Boss_335


  5. #5
    Kart Driver
    Join Date
    May 2015
    Posts
    15
    Quote Originally Posted by tommozza View Post
    Things I've noticed on the Fanatec GT2 wheel and CS Elite pedals on PS4

    - GT2 wheel being recognised as the Turbo wheel
    - Run in PC mode is the only way to use the wheel, but then you don't get the playstation buttons light up on the wheel so thats quite annoying bashing your way around
    - If run in PS3 mode, the game freezes / lags until you turn off the wheel
    - MASSIVE dead zone around the steering centre and I can't seem to calibrate in game like on PC(?). I put it in 'Drift 1' on the steering wheel settings and its better, but far from ideal..
    - Force feedback seems just a tad NQR right now. Not enough of it and almost impossible to correct oversteer etc...
    - I've been using the paddles instead of the clutch but i hear others reporting a clutch problem.

    Desperately needs a fix as the game is somewhere between 'frustrating' and 'unplayable' in present state.

    I should note, the graphics etc I'm enjoying! Its just being let down with the wheel compatibility at the moment….
    Mine is also being shown as a turbo wheel and I have to adjust the button assignments every time I start the game. I also can't seem to get the FFB to feel right.

  6. #6
    pietrogiulia
    Guest
    Thanks for the video. I too am having trouble connecting my GT3 RS wheel to my PS4, although I suspect it's because I need the new firmware. Nonetheless, the more people that register their issues, the better chance we have of a fix!
    The following 3 users likes this Post: Argo1, Boss_335, elie774


  7. #7
    Superkart Pilot Sik180sx's Avatar
    Join Date
    May 2015
    Posts
    125
    Platform
    PS4
    Yes issues here for me too on a 911 turbo s

    •massive deadzone
    •no wheel image in controller settings
    •can't map buttons properly
    •no calibration options

    Oh did i mention the deadzone?lol i did that's right,but i would love to see these things fixed,as i'm sure many others would also cheers guys,great job on the game so far and keep up the great work
    The following user likes this Post: Titzon Toast


  8. #8
    Rookie
    Join Date
    May 2015
    Posts
    2
    Quote Originally Posted by Sik180sx View Post
    Yes issues here for me too on a 911 turbo s

    •massive deadzone
    •no wheel image in controller settings
    •can't map buttons properly
    •no calibration options

    Oh did i mention the deadzone?lol i did that's right,but i would love to see these things fixed,as i'm sure many others would also cheers guys,great job on the game so far and keep up the great work
    I have exactly the same problem...!

  9. #9
    Rookie
    Join Date
    May 2015
    Posts
    1
    Yep, Also having the no clutch issue here -
    Ps4
    Fanatec CSR - Latest firmware (updated yesterday)
    Clubsport Pedals

    Lack of strength in the force feedback (may just be a setting needs turning up, haven't played a heap with it)

    Haven't noticed any other issues at this stage

  10. #10
    Rookie
    Join Date
    May 2015
    Posts
    3

    At least you guys can get your wheel working.

    Have a Porsche 911 GT2 Wheel AU

    Wheel instantly causes game to have extreme lag and be unplayable (Measured framerate of 0.05-0.1 as compared to when played with a controller of 56-58fps (on average)). I was really looking forward to playing this with a wheel, dissapointing seeing as I got the wheel only for this game, and it doesnt work with the exact game I wanted to get it for, hope SMS releases a patch soon or something.

    Contacted fanatec, said it was a problem in SMS side.

    I've tried running the wheel on ps3 mode, and even xbox mode, unresponsive in both, the controls actually work in PC mode.
    The following 2 users likes this Post: Boss_335, Slow n Old


Similar Threads

  1. [XBOX1] Fanatec support/discussion thread
    By Sankyo in forum XB1 - Technical Help & Support
    Replies: 147
    Last Post: 27-06-2017, 15:20
  2. Formula One 2015 Discussion Thread
    By DBG in forum Off Topic Discussion
    Replies: 301
    Last Post: 21-11-2015, 20:50
  3. [PC] Fanatec support/discussion thread
    By Sankyo in forum PC - Technical Help & Support
    Replies: 145
    Last Post: 18-10-2015, 16:18
  4. Audi A1 - Discussion Thread
    By barmydoughnut in forum General Discussion
    Replies: 85
    Last Post: 23-07-2015, 09:15

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •