Project CARS is AMAZING with TX wheel! (pictures of my setup)

[Benja190782]

Forget about the T3PA pedals - you should get the T3PA-PRO pedals!

@r94: the standard pedals are quite good actually - but next to T3PA-PRO they are nothing! You should get them in June when they are in stock.

To those with weak Force Feedback: calibrate the wheel - turn full left - then turn right to you hit 900 degrees. Most important is now.. HOLD the wheel at that point and do so while you press A at the same time - now you should hold it for 5 sec. even if the Force Feedback is strong and rip your arm off.

It worked for me - and the game is now right up there with AC, R3E, rFactor and the others imho.

[stux]

I've done the hold 90 calibration, I've re downloaded, the best thing I found was to use Stella Stig's settings.

Project Cars TX FFB by Stella Stig

Stella Stig’s TX Xb1 FFB Settings - 5/7/15


https://www.youtube.com/watch?v=jrDw...ature=youtu.be


Use 900 DOF



Hockenheim GP

Palmer Jaguar JP-LM



Options -> Controls -> Configuration



Steering Deadzone 0

Steering Sensitivity 40

Throttle Deadzone 0

Throttle Sensitivity 100

Brake Deadzone 0

Brake Sensitivity 100

Clutch Deadzone 0

Clutch Sensitivity 100



Speed Sensititivty 0

Controller Filtering Sensitivity 0

Damper Saturation 0



Force Feedback 100

RPM/Gear Display Yes



Controller Input Mode 3

Advanced On

Soft Steering Dampening Off

Visual Wheel Filtering Off

Opposite Lock Help Off



—> Calibrate FFB



Tire Force 200



Per Wheel Movement 0.35

Per Wheel Movement Squared 0.35

Wheel Position Smoothing 0.05

Deadzone Removal Range 0.15

Deadzone Removal Falloff 0.10



Linkage Scale 0.25

Linkage Stiffness 0.25

Linkage Dampening 1.00



Relative Adjust Gain 0.98

Relative Adjust Bleed 0.10

Relative Adjust Clamp 0.96



Scoop Knee 0.70

Scoop Reduction 0.10

Soft Clipping (Half Input) 0.10

Soft Clipping (Full Output) 0.00



Edit Tuning Setup for Car -> FFB



Master Scale 30 (28 - 40 depending on car)

Fx Scale 116.0

Fy Scale 100.01

Fz Scale 120.00

Mz Scale 100.01



Fx Smoothing 0.0

Fy Smoothing 0.0

Fz Smoothing 0.0

Mz Smoothing 0.0



Arm Angle 1000.0

[GUD OL STONER]

don't know how to. Turn the picture around

Trying to get to grips with the handling, not happy :/

[Benja190782]

^^
How did you get those pedals to work with the TX wheel? I'm sick of waiting for the Thrustmaster T3PA-PRO pedals..

[GUD OL STONER]

Basherboards adapter, can only order them online

[Efill4ziggiN]

There is a basher board adapter on ebay uk as there is a long waiting time for them

[PumaSpec]

Jealous On Santa's list. #1

[Xdelboyx]

1984 Raleigh burner had to get in there

And everyone says bigger screen but from the seat it's the same size as my 60 inch from my sofa

3 subs in this system one in seat base one in seat back and one in pedal base all independently controlled for those rumble strips ))
I fabricated this rig out of galvanised steel handrails from work...it weighs a ton but is solid as a real car!!

[Bryer]

Could you please point us in the direction of what you did to improve things. I'm sure everyone would like more info

Nice setup by the way. Mine is almost the same but I have the shifter too
Cheers

Follow this thread - http://forum.projectcarsgame.com/sho...TX-Read-This-!

[techAU]

I went with the Thrustmaster Ferrari 458 Spider Racing Wheel and pedals. Works a treat. No rumble and strangely no headphone port, but for A$170 it was an affordable solution and was fundamentally changed my experience with CARS.