Xbox One Controller Configuration Guide

[Pressure Drop]

I tried out these settings today and they have made a drastic improvement to the overall handling of the game, using a controller. The most important thing for me i think was setting all the sensitivity and deadzones down to 0. It helps massively. Still some minor tweaks i probably need to make, but thanks once again OP for the info

[menaceuk]

There are some options behind the scenes that were previously available on the PC in the debug menu which are switched on in modes 1 and 2, but not in three. It makes the damping a little less direct and helps move the splines on the curve.



IIRC, it helps make the micro-adjustments a bit less jerky but not less sensitive.

Cool. I will have to give it a go.

Thanks.

[MelBonkers]

Supaafly, genious post mate! I subscribed to this thread right away ;-). And yes, you have to be Bonkers to not appreciate Project CARS ;-).

[General_RIMT]

I've had a very hilarious time tweaking and trying different setups. Couldnt find a good group of settings at all. Then, I decided to clear my settings and just try out the 3 input modes with their default settings. Lol I ended up on input 2 with the default settings and if feels SO perfect! It might work for you, it might not. If ive learned one thing, is that every person has a different taste. Thank you SMS for an awesome racing game! And thank you Stephen basted for that throwback rework of the GTR themesong. So many good memories.

[Jaroslav Turna]

For those who like MODE2 (Real assists):

These are my current personal settings based on default MODE2 (you may like it even more than default):


steering sensitivity can be also lowered to 1

[Crunch70]

Fantastic that is all I can say I went through every bit on setting up and handling is a lot better on nearly everything just a bit to twitchy on the 250cc karts (125cc are great) but a little bit of tweaking and they should be good. Lap times vastly improved thank you

[menaceuk]

For those who like MODE2:

These are my current personal settings based on default MODE2 (you may like it even more than default):

Does it matter what mode you have it on when you are changing the settings anyway? I imagine it would make no difference, unless each mode has certain parameters that are not changeable or seen in the menu.

[Bealdor]

Does it matter what mode you have it on when you are changing the settings anyway? I imagine it would make no difference, unless each mode has certain parameters that are not changeable or seen in the menu.

There are settings tied to the different modes that you can't change. So, the chosen mode does always matter.

[Jaroslav Turna]

Yes, MODEs change things, that are not modifiable from the game menu (turning speeds to name one, but there is much more). That is why they are there and why they are named MODEs not Presets. If you have all values set the same, but different MODE, the input will behave quiet differently.

[menaceuk]

There are settings tied to the different modes that you can't change. So, the chosen mode does always matter.

Yes, MODEs change things, that are not modifiable from the game menu (turning speeds to name one, but there is much more). That is why they are there and why they are named MODEs not Presets. If you have all values set the same, but different MODE, the input will behave quiet differently.

Interesting. I might have to mess about with the other modes then.

Thanks guys.