All ps4 steering wheel pilots should read. Especially jack spade and Morpwr.

[Bunga412]

This is my first post but I have wasted countless hours reading all posts in this forum. I'm addicted. I'm a console boy running a t300. It's a sweet ride. After reading a post from Morpw about lowering the Mz, it got me messing with the my ffb settings again. Thank alot guy. One thing that has always troubled me is that jack spade stands by his settings for the pc. FFB must be 100. They must translate to consoles. I have always thought there must be easy maths u could do to get the global settings to work with jacks classic settings. I think I may have finally got my head around it.

On the pc you have got the control panel set at 75%. Ps4 100%. So it's simple take 25% of certain ffb settings.

Jack says...
FFB 100 always
TF 75-25%=55
Gain 1.5-25%=1.12 I went 1.10
Steering gain 1.45-25%=1.08 I went 1.00

I have posted my global settings on the oscarolim's feedback site.

Now the big one, Mz Morpwr. Thanks fella.
This Self aligning toque, eg. The main ffb u feel getting sideways out of corners. The good feeling.

If jacks mz is 80-25%=60.
Again 70-25%=52.
Again 50-25%=38.
And so on...
I've tried these settings on about 20 odd cars today and they all feel good to me.

I hope they make a statue of jack spade one day in his home village because he has made this game playable for thousands. Me included. And thanks to Morpwr. With out u planting the seed in my head about mz I would have never looked into it more. Thanks guys.

[Tomcul]

It's all subjective tho I run spade settings bumps classic but with tyre force at 175 and ffb strength at 100..

[Mascot]

So.... take 25% off all JS's recommended values? Is that what you mean?

[Bunga412]

G'day mascot. Only the ones I have listed. Mz in the car setup. Tire force, relative adjust gain and steering gain in the global settings. It feels good to me. It has aloud the global settings work across a broader range of cars. I'm only a house painter not a maths professor. But give it a go. Nothing to loose.

[Bunga412]

My T300 settings

FFB:100
TF:55
DRR:0.03
DRF:0.015
RAG:1.10
RAB:0.15
RAC:0.80
SK:70
SR:30
MSS:0.20
LssC:0.75
LssS:0.50
SG:1.00

All mz scales in the car setup menus to be changed to -25%. This is the force that corrects the car. If it's 80 change to 60. This is just a theory. May not work on every wheel. May still need further tweeking. I am happy with the results on the t300, it's the only reason I posted this.

[PureMalt77]

And you should have a shot at this thread... http://forum.projectcarsgame.com/sho...k-used/page171

It's VERY LONG! Just jump to the last 5 pages... My whole FFB knowledge changed (improved) a lot...

[Haiden]

Now the big one, Mz Morpwr. Thanks fella.
This Self aligning toque, eg. The main ffb u feel getting sideways out of corners. The good feeling.

If you haven't tried isolating Mz yet, you should. Set Mz to 100, then zero out everything else (except the Master Scale), and take it for a spin. That will give you a better idea of what Mz is doing than the description alone.

[morpwr]

My T300 settings

FFB:100
TF:55
DRR:0.03
DRF:0.015
RAG:1.10
RAB:0.15
RAC:0.80
SK:70
SR:30
MSS:0.20
LssC:0.75
LssS:0.50
SG:1.00

All mz scales in the car setup menus to be changed to -25%. This is the force that corrects the car. If it's 80 change to 60. This is just a theory. May not work on every wheel. May still need further tweeking. I am happy with the results on the t300, it's the only reason I posted this.

When I figured that nobody really knew how to make the wheel settings work right yet. I was on the right track but going about it the wrong way. I see youre still using ffb at 100 and turning down tf id look at my new wheel settings and give them a try. Like puremalt said id give that forum a read weve come along way in a few months in getting a better understanding of how it works with help from everyone there. Just so you know jacks settings work fine if the wheel is set right no need to adjust them except for maybe turning off the damping on some cars.

[PureMalt77]

My T300 settings

FFB:100
TF:55
DRR:0.03
DRF:0.015
RAG:1.10
RAB:0.15
RAC:0.80
SK:70
SR:30
MSS:0.20
LssC:0.75
LssS:0.50
SG:1.00

All mz scales in the car setup menus to be changed to -25%. This is the force that corrects the car. If it's 80 change to 60. This is just a theory. May not work on every wheel. May still need further tweeking. I am happy with the results on the t300, it's the only reason I posted this.

Your numbers look very "promising" mate... In my list for testing next weekend!

[Hondustar]

Thank you and no thank you lol. Thanks because I can't wait to go home and try those settings out. No thank you because now I'm at work 3 hours into a 12 hour shift and all I can think about are those settings.