Force feedback explained. Configuration settings for all cars and tips

[Sankyo]

is immersive ffb even working, it just feels heavy and the volume does nothing, doesn't seem like autotune is working on it either

What wheel, what FFB settings?

[CRUCIALD00DZ]

holy shit i actually have an issue an even the forums are so poor i cant post it

[konnos]

You might need to have more posts to be able to upload attachments and links.

[Roger Prynne]

holy shit i actually have an issue an even the forums are so poor i cant post it

You need 5 or more posts before you can post links.

[GBO Possum]

Even tough the TTS voice kills me, I'm sticking this for reference

If you play it back at 1.25x speed, it's a whole lot easier to stomach. Quicker too. It's in the settings icon below the playback. Some even like 1.5x

[mattski88]

Hi how r u? i appreciate ur help show how setting w steering . very very helpful. here my question speed senstive why is that low 45 ? if u put 100 it ll increase more speed ? what does speed senstive do to affect gaming speed accerlate pedal ?

[Rantam]

Hi,

please check the spreadsheet for the latest recommended value (which is not 45). The game's manual explains the speed sensitivity as:

• Speed sensitivity
This is a setting that may help when you’re driving at high speeds, especially if you're using a gamepad. Increasing the value for this option will make your steering less sensitive at high speeds. This results in a more detailed steering when you're on a straight (and where you only need a limited amount of steering). This is especially recommended for gamepad drivers who are struggling with fine inputs on straights while wanting to retain the ability to get around the sharper corners.

Lower settings will make the car more twitchy and sensitive at high speed, as the wheels will turn at a faster rate.

Link here -> https://www.projectcarsgame.com/02-o...s.html?lang=en

Regards

[Andre92]

Is there a way to turn off Autotune? If i'm correct, it should only adjust the volume setting when using the immersive and informative modes, not when using custom or raw. On my setup (DD Wheel, small Mige) it tunes down the volume in Raw or Custom mode as well. I also tried Jack Spade's settings and the volume was turned down as well.

I would like to completely turn off autotune. Is that possible?

Regards,
André

[Jack Spade]

Is there a way to turn off Autotune? If i'm correct, it should only adjust the volume setting when using the immersive and informative modes, not when using custom or raw. On my setup (DD Wheel, small Mige) it tunes down the volume in Raw or Custom mode as well. I also tried Jack Spade's settings and the volume was turned down as well.

I would like to completely turn off autotune. Is that possible?

Regards,
André

AFAIK auto adjust only is active with immersive. My files are based on raw and definitely no auto adjust active with these files.

Line in raw/custom files.
# scaler is not hooked to output in RAW

[RomKnight]

Use RAW flavour