Would not work on my pc. I had to roll back to my previous driver to get my 970 sli's working again. Also it's not showing up in the GForce Experience app.
Intel i5 4690k OC'd@ 4.2GHz/ GIGABYTE GA-Z97X-Gaming 5/ Asus Strix GTX 970 SLI/ Corsair H100i/ G.Skill Ripjaws 16GB/ Crucial MX100 512GB SSD/ WD CB 1TB HD/ Toshiba 3TB HD/ EVGA SuperNOVA 750W PSU/ NZXT Switch 810/ Windows 10/ Fanatec FM CSR Wheel/ Fanatec CSR Elite Pedals/ Thrustmaster TH8A Shifter/ Obutto Ozone Cockpit
CPU: i7-4790K @ 4.00 GHZ Haswell / Devil's Canyon (non-overclocked) - RAM: 16GB DDR3 G-Skill Ripjaws 1333MHz (667 MHz) - GPU: MSI GTX 1080 Gaming 8GB - WHQL: Always the latest - DIRECTX API: 11.2 -
HDD: 2TB Samsung HD204UI Sata 3 - MOBO: MSI Z97 Gaming 3 - DISPLAY: 27" BenQ XL2720Z 144Hz - OS: Win 10 PRO 64bit - WHEEL: G25 separated pedals
Love screenshotting as much as I love Pcars. Both are related to me thanks to Pcars only.
Homepage: http://www.zpeed.com.br - STEAM ID: zuotoski - Flickr: zuotoski - Youtube: portalzpeed
I have downloaded the new NVIDIA drivers, too, but looking at what GFE supposes as the optimum settings for my system (PC2 in my sig) I am wondering where those settings come from, as they would render my graphics a lot worse just to get a lot more than the needed 60 FPS.
Maybe those settings let to that some players got the feeling of very bad graphics as they are lowering the graphics a lot even on a decent system ?
Steam: LTC Mike
"Ein Auto ist erst dann schnell genug, wenn man morgens davor steht und Angst hat, es aufzuschließen" W. Röhrl
Sim-PC1: i5 3570K@4.6 Ghz+NH-D14 | 32GB DDR3-1800 | Gigabyte Z77X-UD5H | BeQuiet DP-Pro 750W | EVGA GTX780SC (3GB) | M4 SSD 256GB / 2x WD-Raptor 1TB | BenQ 32" 2560x1440 +24" LG 1920x1200 | Asus Xonar Xense / Logitech X540 / Astro Gaming TR40 | Fanatec CSW v1+CSP V2 +CS Handbrake V1.5| Win 7+Win10/pro/64
Sim-PC2: MSI Nightblade M2 with i5 6400@2.70 GHz | 16 GB DDR4-2300 RAM | MSI GTX1060 ARMOR OC/6GB @ Win 10Pro 64 GER Build 1703 (Craetors Update Ed.)
Wheel-Setup:
pCARS1: (Hardware CSW V1 (1.5) ) SEN Off | FF 100 | SHO 100 | ABS ~80 | LIN Off | DEA Off | DRI -Off | FOR 100+/- | SPR 0~100 | DPR 0~30 / (Driver) ANGLE-900 | DAMPENING-100% / (Controller Setup) Force 100% | Tire-Force 85% | else ->
Jack Spades FFB-Tweeks
pCARS2: (still experimental): (Hardware CSW V1 (1.5) ) SEN Off | FF 100 | SHO 100 | ABS ~85 | LIN Off | DEA Off | DRI -Off | FOR 100+/- | SPR 60 / OFF | DPR 50 / OFF / (Driver) ANGLE-900 | DAMPENING-100% / Game Controller Setup: default (changes n.n.) / Game: Flavour: Informative / RAW | Gain 100 | Volume 50 / (default) | Tone 50 / (default) | FX 50 / (default)
The following user likes this Post: BigDad
Hi Guys
I'm struggling to get some decent frame rates in this game.
my computer specs are Rayzen 5 1600x @4 GHz 8Gb of DDR4 GTX 1080 8Gb Asus 27inch 144hz monitor running a resolution of 2560 x 1440 could someone share some Graphic setting with a similar system.
I have the latest drivers.
Thanks in advance
Last edited by Adrian-; 25-09-2017 at 08:56.
Please make a screenshot of your in-game settings and also state if you have changed anything in the nvidia panel. It might be a good idea to just start a new thread about this :P
In general you can keep everything to high but reduce environment map a bit and also see how shadows affect your performance, these are the most demanding settings that I have noticed. The rest have less impact, but they add up of course.
Windows 10-64bit, Intel i2500, AMD R9 380 4GB, 8GB RAM, 40'' TV, Accuforce V2, Fanatec V3i pedals.
Thanks for your quick reply.
I will take some screenshots tomorrow, I have not touched the Nvidia panel
Cheers
Hi, i played the game and everything was fine but then i updated my grafikcard and now its not so good anymore.
Its like everything is shaking, vibrating, bluring. What is wrong?
Hi,
I suggest those experiencing stuttering to cap framerate to 60 in nvidia profile inspector - off course for the PCars 2 one.... _(if you pc spec manages to keep well this framerate) IMHO every fps above 60 is unnecessary............