FFB Problems Logitech G920 Project Cars 2

[Tirral]

Hi, I am having problems with the g920 and project cars 2. I have done test race as single car on the track and everything is great! However when I go to career mode the cars are undrivavle due to lots of shaking and clunking. Sounds like the wheel is about to go bang. I have made a video to demonstrate what is happening. Any help much appreciated.

https://youtu.be/vLBuXncMYYY

Thanks

[freeman78]

i'have the same pb.
XBOX one, first gen, tx 458.
It's unplayable since july for me.....

[Zaskarspants]

The max grid on Xbox og and s is limited to about fifteen before ffb gets wonky. The xbx is ok.

[hbdeibler85]

See in career mode I have this issue with a certain race. I replicated that race with same number of AI same trqck and same cars and had no issues but in career it feels like my wheel will break. Sad I just bought this, time for AC

[stevemag64]

Hi everyone. When I first started PG2 I was having the same problem, with large fields in career mode. I have since changed my connection to my pouter, and am using 5Ghz, not 2.4Ghz. If your router has the option to split the signal, try that..it worked for me (apart from the odd occasion when the wife is hogging the bandwidth for Uni)

[RichRyx]

I get the same problem. Using a G29 has become harder and harder. Not sure if it just my wheel giving up on me.
I've been reading this to see if it is worth upgrading from a G29 to a Fanatec belt driven wheel.
Anybody here gone from a G29 to a Fanatec CSL or CSW? Care to report how much better it is or if there are any issues such as shaking with PC2?

[hkraft300]

Try less AI (<14) on track the wheel shake should go away.

I'm looking at upgrading to fanatec when the next round of consoles come out. I mean, it's a $1000 wheel vs a $300 wheel.

[Python-Five]

Try less AI (<14) on track the wheel shake should go away.

I'm looking at upgrading to fanatec when the next round of consoles come out. I mean, it's a $1000 wheel vs a $300 wheel.

DO IT NOW ;-) Got my CSL Elite (PS4) yesterday and what a difference compared to the G29.

[Python-Five]

I get the same problem. Using a G29 has become harder and harder. Not sure if it just my wheel giving up on me.
I've been reading this to see if it is worth upgrading from a G29 to a Fanatec belt driven wheel.
Anybody here gone from a G29 to a Fanatec CSL or CSW? Care to report how much better it is or if there are any issues such as shaking with PC2?

I am on PS4 so keep that in mind. The CSL or CSW are SOOOOO much better than the G29. My CSW v2 is not compatible with the PS4 version of PC2 so I reverted back to the G29 which was great but it has a lot of rattling when under load i.e in long, fast corners. And when I touched a rumblestrip it would upset the car so much that I went off track.

The CSL feels very firm. There is no rattle when under force in a fast, long corner and I can drive over rubmlestrips without upsetting the car. If the car gets upset a little, there is the possibility to make corrections and stay on track. If you do get off track, that means you went too fast and hit the grass ;-) I also have the V3 pedals and both rumble motors work perfectly. There is a lot of feeling/feedback from the wheel so you can counter an understeer situation if it is not too extreme.

I am not an expert driver and I am learning to drive (fast) as I go but I also watched Driver61 Track guides where they tell you wat kerbs to hit and where the perfect line is. I could not do that with the G29. Maybe it is a setup thing and maybe some cars are more forgiven than others, driving over kerbs, but I did not like it.

[Python-Five]

I get the same problem. Using a G29 has become harder and harder. Not sure if it just my wheel giving up on me.
I've been reading this to see if it is worth upgrading from a G29 to a Fanatec belt driven wheel.
Anybody here gone from a G29 to a Fanatec CSL or CSW? Care to report how much better it is or if there are any issues such as shaking with PC2?

https://simracingsetup.com/product-g...tec-csl-elite/